ENGINE OIL LEVEL SENSOR - D2P - 31368695
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This D2P ENGINE OIL LEVEL SENSOR (MPN: 31368695) is designed for Volvo vehicles, specifically models equipped with D5 2.4L diesel engines. It ensures accurate monitoring of your engine's oil level, a critical component for preventing engine damage and maintaining optimal performance. While it offers reliable function, compatibility should always be verified against your specific vehicle's make, model, and engine code.
All features
| Model Part Number | 31368695 |
|---|---|
| Brand | D2P |
Extended Product Information
FAQs
What does an engine oil level sensor do?
An engine oil level sensor monitors the amount of oil in the engine's oil pan and sends this information to the vehicle's computer, which then displays it to the driver, often via a dashboard warning light or a digital readout.
Why is it important to have a functioning oil level sensor?
A functioning sensor is crucial for preventing engine damage. Low oil levels can lead to increased friction and overheating, causing severe component wear or failure. Overfilling can also cause engine issues. The sensor helps ensure the oil level remains within the optimal range.
How do I know if my engine oil level sensor needs replacement?
Symptoms can include the oil level warning light illuminating erratically, displaying incorrect readings (e.g., full when low, or low when full), or the sensor not communicating with the vehicle's computer at all, often indicated by a specific diagnostic trouble code (DTC).
What Volvo models are compatible with the D2P 31368695 sensor?
This sensor is compatible with various Volvo models including C30, C70 MK2, S60, S80 MK1/MK2, V70 MK2/MK3, XC60 I, XC70 I/II, and XC90 I, provided they are equipped with the D5 2.4L diesel engine (engine code D 5244 T9).
Can I install this sensor myself?
While possible for individuals with automotive mechanical experience, installation requires draining the oil and careful handling of engine components. If you are not comfortable with these tasks, it is best to have a qualified mechanic perform the installation.
Does this sensor require any calibration after installation?
In most cases, modern vehicles do not require manual calibration. Once installed and connected, the vehicle's ECU should recognize the new sensor. However, clearing any existing fault codes with a diagnostic tool is usually recommended.
What is the voltage requirement for this sensor?
The D2P ENGINE OIL LEVEL SENSOR - 31368695 operates at a standard 12V, which is typical for automotive electrical systems.
Troubleshooting
Oil level warning light stays on after replacement
Ensure the sensor is correctly seated and tightened. Check the electrical connector for corrosion or damage. Verify the sensor is the correct part number for your vehicle. A diagnostic scan may be needed to reset any stored fault codes.
Inaccurate oil level readings (consistently high or low)
Confirm the vehicle's oil level is correct manually using the dipstick. Check for any obstructions around the sensor in the oil pan. The sensor itself may be faulty and require replacement.
Sensor connector is damaged or corroded
Clean the connector pins carefully. If pins are bent or broken, the connector may need to be replaced. Ensure a secure electrical connection is re-established.
Oil leak from sensor area
The sensor may not be tightened correctly, or the gasket/seal may be damaged or missing. Re-torque the sensor to specification or replace the gasket/seal.
Pros and Cons
Pros
- Ensures accurate oil level readings, crucial for engine health.
- Designed as a direct replacement for a hassle-free installation.
- Built to withstand the demanding conditions of an engine bay.
- Helps prevent potential engine damage caused by low or high oil levels.
- Specific application list provides clarity for compatible Volvo models.
Cons
- Only compatible with specific Volvo D5 2.4L diesel engine variants.
- Requires professional installation or mechanical knowledge.
- May not be suitable for aftermarket engine modifications.
- Potential for electronic system faults if not installed correctly.
- Part availability may vary by region.
Setup, Compatibility & Care Instructions
Compatibility Check: Before installation, verify that your vehicle's make, model, year, engine size, and engine code match the specifications listed for the D2P 31368695 sensor. This includes Volvo C30, C70 MK2, S60, S80 MK1/MK2, V70 MK2/MK3, XC60 I, XC70 I/II, and XC90 I models equipped with the D5 2.4L 120KW (163HP) D 5244 T9 FWD diesel engine.
Installation: This sensor is typically located in the oil pan. Installation requires draining the engine oil, removing the old sensor, cleaning the mounting surface, and installing the new sensor. Ensure the new sensor is tightened to the manufacturer's specified torque to prevent leaks and damage. A new gasket or seal may be required; consult your vehicle's service manual. It is recommended to have this part installed by a qualified mechanic.
Care: Once installed, the sensor requires no specific user maintenance. Its performance is dependent on the overall health of the engine and its oil. Regularly check your engine oil level and condition as per your vehicle's owner manual.