Boutique Chunky Horizontal Weave Textured Wallpaper - Rust Orange

Use a high-quality paste specifically designed for paste-the-wall wallpapers.

While the wallpaper is moisture resistant, it is best to avoid direct contact with water. Ensure good ventilation to prevent moisture build-up.

Align the pattern on each strip of wallpaper before applying it to the wall. Some pattern matching may require extra wallpaper.

You'll need a pasting brush, smoothing tool, sharp blade or utility knife, measuring tape, and a level.

This wallpaper is designed to be used as is, and painting it is not recommended as it may alter its texture and finish.

Due to its paste-the-wall application, the wallpaper should be relatively easy to remove. Gently peel from the top corner and pull downwards. If it is difficult, use a wallpaper removal solution.

Make sure to purchase sufficient rolls to complete your project, accounting for pattern matching and waste. You can usually find the same batch number to match if you run out, but to ensure that the color and the pattern are consistent, buy all the rolls at the same time.

Ensure the wall is properly prepared, clean, and primed. Make sure the paste is applied evenly and allow sufficient time for the paste to activate before smoothing the wallpaper.

Use a smoothing tool to gently push the air bubbles towards the edges of the wallpaper. For larger bubbles, carefully lift the wallpaper and re-adhere it, smoothing it out again.

Ensure the edges of the wallpaper are butted up closely together without overlapping. Use a seam roller to gently press the seams to secure them.