Kase Clip-In Filters - ND64 (6 Stop)

This filter is designed specifically for the Nikon Z6 and Nikon Z7 mirrorless camera bodies.

The ND64 filter reduces light by 6 f-stops.

Yes, the filter can be used for video recording to achieve motion blur effects or to allow for wider apertures in bright conditions, adhering to the 180-degree shutter rule.

While the filter significantly reduces light, it is made from high-quality optical glass designed to minimize impact on autofocus performance. However, in very low light conditions after the filter is applied, autofocus may struggle more than usual.

Use a soft lens brush for dust. For smudges, gently wipe with a microfiber lens cloth slightly dampened with lens cleaning fluid. Avoid direct spraying onto the filter.

Yes, the filter is designed to be mounted inside the camera body and also serves to protect the sensor. However, it's good practice to remove it for cleaning or when not in use for extended periods.

Please refer to the manufacturer's documentation or the retailer for specific warranty information, as it can vary.

Ensure the camera is off and the filter is correctly oriented. Check for any debris in the camera's filter slot or on the filter itself.

Confirm the filter is clean and free of smudges. Ensure it is properly seated. The B270 optical glass with nanocoatings is designed for sharpness, so issues are likely due to handling or installation.

Handle the filter by its designated tabs or edges for removal. If it feels stuck, gently try wiggling it while applying even, light pressure. Avoid excessive force.

Verify that the filter is indeed the ND64 (6 Stop) version and that it is correctly installed. Ensure your camera settings are appropriate for long exposure photography.