LOOK Kéo Grip Cleats - RED 4.5 DEGREEE

These LOOK Kéo Grip Cleats have a float angle of 4.5 degrees, allowing for a certain amount of foot movement while pedaling.

No, these cleats are specifically designed for LOOK Kéo road pedals and are not compatible with other pedal systems like Speedplay.

The 'Grip' refers to the enhanced non-slip surface integrated into the cleat, which provides better traction and stability when walking off the bike.

These cleats are compatible with most road cycling shoes featuring a standard 3-bolt cleat mount. Some shoes with a 4-bolt pattern may require an adapter plate.

Cleat position can be adjusted using the mounting screws. They offer 12mm of fore-aft adjustment and 4mm of lateral adjustment to fine-tune your fit.

The cleats are made from a combination of Polyacetate and PTFE, chosen for their wear resistance and smooth operation.

You will typically need a Phillips head screwdriver or a compatible Allen key (depending on the screw type provided) to install the cleats.

Ensure cleats and pedal are clean and free of debris. Check cleat screws for tightness. Verify correct cleat alignment on the shoe.

Apply a small amount of dry lubricant to the cleat surfaces and pedal springs. Ensure cleat screws are not over-tightened, which can cause shoe flex.

Adjust the cleat position (fore-aft, lateral, or rotational) to find a more comfortable and efficient pedaling stance. Consider the float angle's suitability for your biomechanics.

Minimize walking in the cleats when possible. Ensure consistent cleaning and check for any sharp debris on walking surfaces. Replace worn cleats promptly.