Paint Ready Wall Panel Kit - 3 Panels Mix and Match

You will need a measuring tape, level, pencil, adhesive (such as construction adhesive or panel adhesive), a saw (if cutting panels), and a paint brush or roller for painting.

These panels are suitable for use in bathrooms. Ensure the area is well-ventilated and use a moisture-resistant paint.

The panels are not specifically fire-resistant. However, standard fire safety practices should be followed.

Yes, you can cut the panels to fit with a saw. Ensure you measure accurately and use appropriate safety precautions.

You can use any high-quality interior paint. However, it is recommended to use a paint suitable for the environment and the finish you want to achieve (e.g., satin, eggshell, or gloss).

Use a soft, damp cloth to clean the panels. Avoid using abrasive cleaners or excessive water, which may damage the surface.

Removing the panels may be possible but could cause damage to the wall. It depends on the adhesive used. It's best to consider the installation as a permanent fixture.

Ensure the wall surface is clean and dry before applying adhesive. Use a high-quality adhesive suitable for the panel material. Double-check the installation guide.

Lightly sand the primed surface before painting. Use a high-quality paint and follow the manufacturer's instructions for application.

Ensure the panels and mouldings are precisely aligned during installation. Use a level to ensure straight lines. Fill any small gaps with caulk and repaint.