CK Tools XT Pro Class I Tape Measure - 5m
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The CK Tools XT Pro Class I Tape Measure is an essential precision tool for contractors, carpenters, and DIY enthusiasts who demand high-accuracy measurements on the job site. Offering superior Class I precision with a robust 4.1m standout, this tape measure excels in one-person measurement tasks; however, its heavy-duty build and larger casing may feel slightly bulkier in smaller pockets compared to entry-level consumer models.
All features
| Model Part Number | T3448A 5 |
|---|---|
| Brand | CK Tools |
Extended Product Information
FAQs
What does Class I precision mean?
Class I refers to the accuracy standard of the tape measure, specifically a maximum tolerance of +/- 1.1mm over a 10m length, meeting high industrial standards.
Can I use the magnet on non-metallic surfaces?
Yes, the hook functions as a standard hook on wood or plastic surfaces, but the magnetic feature will only provide extra grip on ferrous metals.
Is the blade replaceable?
No, the internal mechanism is sealed to ensure the accuracy and longevity of the tape; do not attempt to open the case.
Is the blade nylon-coated?
Yes, the blade features a nylon coating that protects the printed measurements from abrasion and increases the life of the blade.
What is the maximum standout?
The blade provides an unsupported standout of up to 4.1 meters under standard conditions.
Troubleshooting
Blade retraction is slow or sluggish
Check the internal track for dust or debris; pull the blade out fully and clean with a dry cloth, then allow it to retract naturally.
Magnetic hook not grabbing securely
Inspect the face of the magnet for metallic dust buildup and wipe clean; ensure the hook rivets are tight.
Lock button fails to hold the blade
Ensure no grit is lodged under the lock mechanism and that the blade is fully inserted when engaging the lock.
Pros and Cons
Pros
- Class I accuracy ensures highly precise professional results
- Impressive 4.1m standout reduces the need for a second person
- Nylon-coated blade offers excellent abrasion resistance
- Robust rubber-coated case withstands harsh site conditions
- Magnetic hook simplifies measurements on steel studs and joists
Cons
- Heavier and bulkier than standard consumer-grade tape measures
- Larger width blade may be less flexible for curved surface measurements
- Initial cost is higher due to professional-grade classification
Setup, Compatibility & Care
No assembly is required for this tool. To maximize the lifespan of the tape, keep the blade clean of debris or grit by wiping it down with a dry cloth periodically; avoid using harsh chemical solvents that might damage the nylon coating. Always guide the tape back into the case slowly rather than allowing it to snap back at full speed, as this protects the hook and internal spring mechanism. If the magnet becomes clogged with metal shavings, use a piece of adhesive tape or a small brush to clear the surface. The included wrist lanyard should be utilized when working at height to prevent accidental drops.