Timco Professional Mixing Paddle - 120 X 600 - M14

This paddle is designed for viscous building compounds including tile adhesive, bonding mortar, jointing compound, board finishes, plaster, floor screed, cement compounds, and filler.

The shank type is M14. This is a common fitting for many professional power mixers, but always confirm your mixer's compatibility.

Clean the paddle with water and a brush immediately after use. The zinc plating makes it easy to clean. Ensure it is dried thoroughly before storage.

The paddle diameter is 120mm, and the overall length is 600mm.

This paddle is designed for heavy-duty, viscous building compounds. While it might mix paint, it is optimized for thicker materials, and a different type of paddle might be more suitable for paint.

The helical fin pattern ensures rapid and effortless mixing, creating a thorough blend from the bottom to the top of the mixture, preventing lumps and ensuring consistency.

Ensure the paddle is fully inserted and securely tightened in the mixer chuck. Check that the mixer speed is appropriate for the material's viscosity. Verify the material consistency is not too dry or too wet.

Confirm the paddle is straight and undamaged. Ensure the mixer chuck is properly tightened around the shank. Try a lower mixer speed if the material is very thick.

Clean the paddle immediately after use with water and a stiff brush. For dried-on material, soak the paddle in water before cleaning. Ensure the zinc plating is intact to facilitate easier cleaning.