Locinox Aluminium Gate Hold Back Catch - Ready Made Gates

The chassis is made from aluminium with a powder-coated finish for durability and corrosion resistance.

It is designed for gates with profiles between 40mm and 60mm for the stop rubber. Installation also requires a secure anchoring point, ideally in concrete.

The catch hook is pre-mounted to catch the underside of the gate, but it is reversible and can be adjusted for different gate types.

Yes, the polyamide catch hook and adjustable stop rubber are designed to prevent damage to the gate when it is held open.

The catch hook offers height adjustability of up to 40mm, allowing for precise alignment.

It features anchoring holes for fast and strong fixing directly into concrete.

Yes, the stop rubber is adjustable to accommodate gate profiles from 40mm to 60mm.

Ensure the catch hook is correctly aligned with the post-mounted catch and that the stop rubber is adequately adjusted. Verify that the installation is secure and the post is stable.

Check for obstructions or debris around the catch mechanism. Adjust the height or angle of the catch hook slightly. Ensure the gate itself is moving freely.

Adjust or reposition the stop rubber to provide a softer stop. Ensure the polyamide catch hook is correctly aligned to avoid direct impact on the gate surface.

Re-examine the concrete fixing. If the concrete is not fully cured or the anchors are not set properly, further concrete may be required to secure the base plate firmly.