Best current price£6.03from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£6.03Visit shop MAHLE ORIGINAL Oil filter FIAT,SEAT,ALFA ROMEO OC 473 0000004434794,0000060504284,0060536129 Engine oil filter 0060537470,0060744108,4434791,4434793
Visit shop
Amazon£11.16Visit shop MAHLE OC 473 Oil Filter
Visit shop12 offers from £6.03 - £11.16
View price history by clicking the chart icon.
The MAHLE OC473 is a premium spin-on oil filter engineered for vehicle owners and mechanics seeking reliable engine lubrication and enhanced filtration performance. Designed to maintain internal engine cleanliness through high-quality materials and precise flow control, it provides excellent protection for various vehicle models. Please note that users must verify the specific thread size (3/4-16UNF-1B) and seal diameter compatibility before installation to ensure a proper, leak-free seal.
| Model Part Number | OC473 |
|---|---|
| Brand | MAHLE |
The filter features a 3/4-16UNF-1B thread size.
The recommended tightening torque is 10 Nm.
Yes, it features two anti-return valves to keep oil within the filter system.
The seal diameter is 62.5 mm.
Yes, 79.0 mm is the standard manufactured height for the OC473 model.
No, compatibility depends on your specific vehicle's requirements for thread size, seal diameter, and bypass pressure.
Verify the old gasket from the previous filter was removed and ensure the filter is tightened to the recommended 10 Nm.
Ensure you are using a proper filter wrench tool and avoid over-tightening during installation; only hand-tighten until the seal touches, then apply the final torque.
Check that the filter is seated correctly and verify that the oil level in the engine is sufficient; if the issue persists, consult a technician.
To install the MAHLE OC473, first ensure the old oil filter is removed and the mounting surface on the engine block is wiped clean of debris and old gasket remnants. Apply a light film of clean engine oil to the new filter's rubber seal (62.5 mm diameter) before spinning it on by hand. Once the seal makes contact with the mounting surface, use a torque wrench to tighten the filter to the specified 10 Nm. Over-tightening can damage the gasket and lead to leaks, while under-tightening may cause the filter to loosen due to engine vibration. Always verify compatibility with your vehicle's service manual, as this filter is specific to models utilizing the 3/4-16UNF-1B thread configuration.
