Best current price£11.50from eBay
Shopping.co.uk recommended and popular offers
eBay£11.50Visit shop Varilight XDYT1VS.PD Screwless Primed Brass 1 Gang 10A 2 Way Toggle Light Switch
Visit shop
B&Q£11.90Visit shop B&Q - Single Toggle Light Switch 2-WayScrewless Primed Ready To Paint With Polished Brass ToggleXdyt1Vs.pd
Visit shop5 offers from £11.50 - £17.14
View price history by clicking the chart icon.
The Varilight 1-Gang 10A Toggle Switch in White is designed for homeowners looking to customize their interior aesthetics. Its key benefit is a paintable metal faceplate that allows seamless integration with any decor. A minor caveat is that it requires painting before installation to achieve the desired custom look. This switch offers versatility with both 1-way and 2-way operation and is built with quality in mind, featuring a UK manufacturing origin and a lifetime guarantee.
| Colour | White |
|---|---|
| Model Part Number | Xdyt1Vs.pd |
| Brand | Varilight |
Yes, this switch is designed to support both 1-way and 2-way switching configurations.
The switch comes with a primed faceplate that is ready to be painted. While you can install it as is, painting it allows it to blend seamlessly with your decor.
It is recommended to use a primer suitable for metal surfaces, followed by your chosen decorative paint. Ensure good ventilation and allow adequate drying time for all coats.
The switch has a rating of 10A, which is suitable for most standard lighting circuits in a home.
The dimensions are 86mm in height and width, with a depth of 36mm.
No, this switch is designed for indoor use only.
The lifetime guarantee typically covers manufacturing defects under normal use. Please refer to the warranty documentation provided by Varilight for specific terms and conditions.
Verify that the power supply is restored and that all wiring connections are secure and correct for 1-way or 2-way operation. Double-check the fuse or circuit breaker.
Ensure the switch is securely mounted to the back box. If the issue persists, it may indicate an internal fault, and the unit may need replacement.
This may be due to inadequate surface preparation or incorrect paint application. Ensure the faceplate was properly primed and painted with appropriate materials. Avoid harsh cleaning agents.
Setup: This switch is designed to replace existing standard light switches. Ensure the power is turned off at the mains before attempting installation. Connect the wires according to standard electrical wiring practices for either 1-way or 2-way switching. Consult a qualified electrician if you are unsure about wiring.
Painting: Before installation, the primed metal faceplate should be painted. Use a suitable metal primer followed by your chosen topcoat. Ensure good ventilation during painting and allow adequate drying time.
Compatibility: The switch is compatible with standard UK back boxes and single-gang electrical installations.
Care: To clean, first switch off the power. Wipe the faceplate with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the paint finish.
