BlueSpot 40mm SDS Core Bits - BlueSpot Tools

This core bit is suitable for use on a variety of materials, including brick, concrete, and some masonry materials. Always check the material suitability before use.

Always wear safety glasses, a dust mask, and gloves. Consider using ear protection and a hard hat when appropriate. Ensure the work area is clear of obstructions.

Screw the core bit onto the SDS arbor, which is then inserted into your SDS-equipped power tool. Ensure it is securely fastened.

After use, clean the core bit and arbor to remove debris. Store in a dry place. Inspect the teeth for wear and tear, and replace the bit when necessary.

The guide drill helps to center the core bit and ensures that the hole starts accurately, improving precision and ease of use.

Check the sharpness of the teeth, ensure the correct speed and pressure are being used. Ensure the bit is compatible with the material you are trying to cut.

Reduce the drilling speed and avoid applying excessive force. Try reversing the drill briefly to help release the bit. If the issue continues, consider using lubricant.

Check the sharpness of the tungsten carbide teeth. If dull, consider replacing the core bit. Ensure you are using the correct speed for the material and applying even pressure.

Reduce the drilling speed and ensure you're not applying excessive force. Try reversing the drill briefly to help release the bit. If necessary, use a lubricant suitable for the material.

Ensure the guide drill is properly centered. Start drilling slowly to avoid the bit wandering. Maintain a steady hand and apply even pressure.