OLPRO Secure A Plate - MF7A02800001

The adhesive is designed for a long-term hold. Removal may require a heat gun or adhesive remover, which could potentially affect the finish of the cupboard surface.

It is designed for standard plates and bowls, with a maximum support height of 17cm. Extremely large serving platters may exceed these specifications.

Yes, as long as there is enough clearance within the drawer for the unit's height and the adhesive can be mounted securely to the drawer wall.

The unit is designed for storage organization, not direct food contact. It is made from standard high-quality plastic.

Depending on the width of your stack, one or two units placed at opposing sides are usually sufficient to prevent shifting.

Ensure the surface was cleaned with alcohol and dried completely before application. Check if the surface is textured, as the adhesive works best on smooth, non-porous materials.

Verify that the adjustable mechanism is fully tightened or locked. Ensure that the stack of plates does not exceed the 17cm support height limit, which could cause leverage issues.