Artex Easifix Classic C-Shaped Plaster Coving - (L)2M (W)127mm

You will need a measuring tape, saw (mitre saw recommended), adhesive, filler, sandpaper, a damp cloth, and paint.

Yes, the coving is paintable. Prime and paint it to match your desired colour scheme.

Use a mitre saw to cut the coving at 45-degree angles for internal and external corners.

Use a coving adhesive specifically designed for plaster coving. This will ensure a strong bond.

The drying time for the adhesive will vary depending on the product. Refer to the manufacturer's instructions for specific drying times.

Yes, you can install this coving in a bathroom, but ensure the area is well-ventilated to prevent moisture build-up and use a paint suitable for bathrooms.

Use a soft, damp cloth to wipe the coving. Avoid using harsh chemicals or abrasive cleaners.

Ensure the surfaces are clean and use an appropriate adhesive. Apply sufficient adhesive to the back of the coving and hold it firmly in place until it sets.

Use filler to fill any gaps or cracks. Sand the area smooth and repaint.

Carefully remove the damaged section and replace it with a new piece. Ensure you handle the coving with care to prevent further damage.