Best current price£33.30from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£33.30Visit shop Joy-it DIY arcade and joystick kit for DIY arcade or control project
Visit shop3 offers from £33.30 - £36.02
View price history by clicking the chart icon.
The Joy-iT DIY Arcade and Joystick Kit is designed for hobbyists, retro-gaming enthusiasts, and DIY makers who want to build a custom arcade cabinet or specialized control interface from the ground up. The primary benefit of this kit is its industrial-grade durability, featuring a metal-constructed joystick and high-cycle micro-switches that ensure reliable responsiveness during intense use. One important caveat is that this kit serves as a hardware foundation; it does not include a control board or software, meaning users must possess basic wiring and electronics knowledge to integrate it into their specific project.
| Model Part Number | DIY-AC-Kit |
|---|---|
| Brand | JOY-IT |
No, this kit includes the physical arcade controls only. You will need to source a separate USB arcade encoder for plug-and-play functionality.
Yes, it can be connected to the Raspberry Pi GPIO pins directly or via an arcade encoder board.
Yes, the metal construction and responsive micro-switches make it very suitable for the rapid, precise inputs required for fighting games.
You will need a drill to mount the buttons and joystick, a screwdriver, and potentially a soldering iron depending on your connection method.
Yes, the micro-switches used in the joystick and buttons are standard components and can be replaced if they eventually wear out after heavy use.
Verify the wiring between the micro-switch and your encoder board. Ensure the 'Common' wire is connected to the correct ground terminal.
Check if the micro-switch lever is physically aligned with the joystick actuator. Adjust the switch mounting if necessary.
Check for debris around the button plunger. Ensure the micro-switch is properly snapped into the button housing.
Building with the Joy-iT DIY-AC-Kit requires basic electrical assembly skills. Since the kit provides the physical controls, you must ensure you have a compatible controller interface (encoder) that supports the specific micro-switch pin configuration.
