High quality PERT multilayer pipe suitable for underfloor heating systems. PERT pipe is durable, f...High quality PERT multilayer pipe suitable for underfloor heating systems. PERT pipe is durable, flexible, and resistant to corrosion, pitting, and mineral buildup. It is lightweight and installed faster than other pipe types. This 16mm pipe is made from high-density polyethylene and can bend at a 90-degree angle. Specifications: Maximum Temperature (Tmax): 95°C, Maximum Pressure (Pmax): 10 bar. Certified EN ISO21003 and WRAS Approved. Features an aluminium layer with a thickness of 0.25mm. Coefficient of thermal conduction: 0.43 W/m/K. Linear expansion coefficient: 0.025 mm/m/k. This offer includes a 100m roll of pipe and 60mm pipe staples.
This 100m roll of B&Q Underfloor Heating Pipe is designed for professionals and DIY enthusiasts installing or upgrading underfloor heating systems. Its key benefit is its durability, flexibility, and resistance to corrosion, ensuring a long-lasting and efficient heating solution. A minor caveat to consider is its specific 16mm diameter, requiring compatible fittings. The pipe is constructed from high-density polyethylene with an integrated aluminum layer, making it lightweight and quick to install, and it can safely operate at temperatures up to 95°C and pressures up to 10 bar.
All features
Brand
B&Q
Extended Product Information
FAQs
What is the maximum operating temperature and pressure for this pipe?
The pipe has a maximum operating temperature of 95°C and a maximum operating pressure of 10 bar.
Can this pipe be used for domestic hot water?
This pipe is specifically designed and approved for underfloor heating systems. It is not intended for potable hot water applications.
What is the minimum bending radius for this pipe?
The pipe can bend at a 90-degree angle, but for longevity and to avoid kinking, it's advisable to maintain a larger radius where possible, typically around 5 times the pipe diameter.
Does the 100m roll include pipe staples?
Yes, this offer includes a 100m roll of pipe and 60mm pipe staples.
Is this pipe suitable for direct burial in concrete?
Yes, this multilayer pipe is designed for installation within screed and concrete floors.
What certifications does this pipe hold?
The pipe is certified to EN ISO21003 standards and is WRAS Approved, ensuring it meets safety and quality requirements.
How do I connect this pipe to my manifold?
You will need compatible fittings, such as compression or crimp fittings, designed for 16mm multilayer pipe. Refer to the manifold and fitting manufacturer's instructions for specific connection procedures.
Troubleshooting
Pipe is stiff and difficult to bend
Allow the pipe to warm up to room temperature before bending. Avoid forcing sharp bends, which can kink or damage the pipe. Gentle, consistent pressure is key.
Leak at a fitting connection
Ensure the fitting is correctly sized for 16mm pipe and is properly installed according to the fitting manufacturer's instructions. Re-seat the fitting or replace if damaged.
Reduced heating performance
Check for blockages in the pipe or manifold. Ensure the water pressure and temperature settings are correct. Verify there are no kinks in the pipework restricting flow.
Pipe staple is not holding firmly
Ensure the staple is being driven into a suitable substrate (e.g., insulation board or timber). Use staples appropriately spaced to support the pipe without distorting its shape.
Pros and Cons
Pros
Excellent corrosion and buildup resistance
High flexibility for easier routing during installation
Robust temperature and pressure capabilities
Faster installation reduces labor costs
Certified for quality and safety standards
Cons
Specific 16mm diameter requires compatible fittings
Long roll may be cumbersome for very small projects
Requires specialized tools for secure connections (not included)
Setup, Compatibility & Care Instructions
Setup:
Planning: Design your pipe layout, ensuring minimal sharp bends and planning for expansion.
Laying the Pipe: Unroll the pipe and lay it according to your design. Use the included 60mm pipe staples to secure the pipe to insulation or subfloor at regular intervals (typically every 30-50cm).
Bending: Gently bend the pipe as needed; it can achieve a 90-degree angle. Avoid kinking the pipe during installation.
Connections: Use appropriate fittings (e.g., compression fittings or crimp fittings compatible with 16mm multilayer pipe) to connect sections of pipe or to connect to manifolds.
Testing: Before covering, pressure test the system with water or air to check for leaks.
Compatibility:
This 16mm pipe is compatible with standard underfloor heating manifolds and fittings designed for 16mm multilayer pipe.
Ensure all connectors and fittings are certified for use with PERT pipes and the operating temperatures/pressures.
Care:
Once installed and covered, the pipe requires minimal care due to its durable construction.
Periodically check the heating system's performance. In the unlikely event of an issue, ensure access points to pipework are clear.