Tommee Tippee Perfect Prep Day & Night Bottle Maker - White

The antibacterial filter should be changed approximately every 3 months, or when the filter warning light illuminates on the machine, whichever comes first. Using an expired or clogged filter can compromise water quality and machine performance.

Yes, the Tommee Tippee Perfect Prep Day & Night machine is designed to work with all standard brands of powdered infant formula. You can also use most standard baby bottle sizes.

Always use cold tap water. The machine's antibacterial filter purifies the water, and the 'hot shot' function sterilizes the formula, ensuring a safe feed for your baby.

Yes, the 'hot shot' is crucial. It dispenses a small amount of very hot water at the beginning of the cycle, specifically designed to kill any bacteria that may be present in the formula powder, ensuring a hygienically prepared feed.

Regular cleaning is vital. You should clean the water tank daily with warm soapy water and rinse thoroughly. A full cleaning cycle (following the instructions in your manual) should be performed periodically, or when the machine prompts you, to descale and sanitize the internal system. Do not use harsh or abrasive cleaners.

No, it's recommended to only use cold tap water. The antibacterial filter is designed to purify tap water. Using pre-boiled or bottled water can impact the machine's functionality and may not provide the same level of hygiene or temperature accuracy.

The machine will typically alert you with an indicator light or message when the water level is low. Simply refill the water tank with fresh, cold tap water up to the maximum fill line. The machine will then be ready to continue preparing feeds.

Ensure the power cord is securely plugged into both the machine and a working electrical outlet. Check your household fuse or circuit breaker. If the issue persists, try a different power outlet.

Ensure the antibacterial filter is correctly installed and not expired. Run a cleaning cycle to clear any blockages or mineral buildup. Always use cold tap water; do not use pre-heated or distilled water. If the 'hot shot' function appears to be failing, contact customer support.

Refer to your user manual for specific error codes as they indicate different issues (e.g., low water, filter replacement needed, cleaning cycle required). Most issues can be resolved by following the on-screen prompts or manual's instructions for the specific code.

Check that the water tank is filled above the minimum level. Ensure the antibacterial filter is properly seated and not clogged. A full cleaning cycle may be required to clear any scale buildup within the machine's internal pipes.

Some pump noise is normal during operation. However, excessive or unusual noises might indicate an airlock or partial blockage. Try running a full cleaning cycle. If the noise persists or is accompanied by other performance issues, contact customer support.