Best current price£12.65from eBay
Shopping.co.uk recommended and popular offers
eBay£12.65Visit shop StarTech.com 3m White Slim CAT6 Ethernet Cable Snagless 100W PoE UTP LSZH 28AWG
Visit shop4 offers from £12.65 - £16.57
View price history by clicking the chart icon.
This 3-meter white Slim CAT6 Ethernet cable from StarTech.com is designed for high-density network installations requiring optimal flexibility and airflow. It reliably delivers Gigabit Ethernet and up to 100W of PoE++ power, making it ideal for powering remote devices in crowded network racks. A key benefit is its 36% thinner profile compared to standard Cat6 cables, enhancing airflow and simplifying routing, though its specific white color may not fit all aesthetic requirements.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT300CMWHS |
| Brand | StarTech.com |
The primary advantage is its significantly reduced diameter (36% thinner than standard Cat6), which allows for better airflow and heat dissipation in high-density installations and makes it easier to route in confined spaces.
Yes, this cable meets all Category 6 specifications and is designed to reliably support Gigabit Ethernet (1000 Mbit/s) and frequencies up to 250 MHz.
LSZH stands for Low Smoke Zero Halogen. This means the jacket material emits minimal smoke and no toxic halogens when exposed to extreme heat or fire, making it safer for use in poorly ventilated or public areas.
PoE++ (IEEE 802.3bt Type 4) is an enhanced Power over Ethernet standard that can deliver up to 100W of power. This cable complies with that standard and is designed to reliably carry that power to remote devices.
Yes, the cable features snagless RJ45 connectors, which protect the locking clip during installation and removal, preventing the cable from snagging on other cables or equipment.
The main differences are its 36% slimmer profile, its LSZH jacket, and its compliance with PoE++ standards for higher power delivery. It maintains the same Gigabit Ethernet performance as a standard Cat6 cable.
No, this cable is U/UTP (Unshielded Twisted Pair), meaning it does not have an additional metallic shield around the pairs of wires. It relies on the twisted pair design for interference rejection.
Ensure both ends of the cable are securely plugged into the correct ports. Check if the LEDs on the network ports indicate a connection. Try using a different Ethernet cable and port to isolate the issue.
Verify that the connected devices support Gigabit Ethernet. Ensure the cable is not damaged or kinked. Check for other network congestion or hardware issues that might be limiting speed.
Confirm that the power sourcing equipment (e.g., PoE switch) supports PoE++ (802.3bt Type 4) and can deliver the required wattage. Check that the device itself is compatible with the power delivered. Ensure the cable is fully seated at both ends.
While the cable is flexible, avoid forcing it into extremely tight bends, which could damage internal conductors. Gently guide the cable along its intended path, utilizing its slim profile.
Setup: This is a standard Ethernet patch cable. To set up, simply connect one RJ45 connector to your network device (e.g., computer, switch, router, IP camera) and the other RJ45 connector to its corresponding network port. Ensure a firm click to confirm the connection. It supports Plug and Play functionality, requiring no additional software or configuration.
Compatibility: This cable is compatible with all standard networking devices that use RJ45 connectors and support Fast Ethernet (10/100Base-T) and Gigabit Ethernet (1000Base-T) standards. It also fully supports IEEE 802.3bt Type 4 PoE++ (4PPoE) for power delivery up to 100W.
Care:
