SLX Telephone Socket - White
Best current price£4.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£4.00Visit shop B&Q - White 1 Gang Telephone Socket 85mm
Visit shopB&Q£4.00Visit shop One Offer
1 offer from £4.00
View price history by clicking the chart icon.
Product Information
Full details
This guide is for homeowners and installers looking for a reliable, flush-mounted telephone socket. The SLX 3/3A socket offers a clean aesthetic and straightforward installation for replacing existing faceplates or adding new telephone points. While it provides a secure IDC connection, it is designed specifically for standard telephone line installations and may not suit more complex networking needs.
All features
| Brand | SLX |
|---|
Extended Product Information
FAQs
What type of connection does this socket use?
This socket uses Insulation Displacement Connectors (IDC) for connecting telephone wires.
Can I use this for my broadband internet?
This socket is designed for standard voice telephone lines. While it may pass a broadband signal, it is not optimized for high-speed data and a dedicated data socket or filter is recommended for optimal broadband performance.
Do I need to strip the wires before connecting them?
No, the IDC connectors are designed to pierce the insulation of the wires, so stripping is not required.
Is this socket suitable for outdoor use?
No, this socket is designed for indoor use only.
What is the warranty period for this product?
Please refer to the product packaging or manufacturer's website for specific warranty information.
How do I clean the SLX telephone socket?
Wipe the socket with a soft, dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
Can this replace any type of telephone socket?
It is designed to replace standard UK single-gang telephone faceplates. Ensure your existing setup matches before replacement.
Troubleshooting
No dial tone after installation
Verify that the correct wires are terminated in the IDC connectors and that they are fully pushed in. Double-check that the power to the line is correctly terminated and that the line itself is active.
Intermittent connection or poor call quality
Ensure all wire connections are secure within the IDC terminals. Check the telephone line for damage and inspect the connected telephone device for faults.
Socket faceplate is loose
Re-secure the faceplate to the wall box using appropriate screws. Ensure the back box is firmly fixed to the wall.
Pros and Cons
Pros
- Provides a clean, flush-mounted finish.
- IDC connections simplify installation by eliminating the need to strip wires.
- Direct replacement for existing telephone sockets.
- Durable construction for long-term use.
- Neutral white color complements various interior designs.
Cons
- Single connection point limits expansion.
- Primarily for standard telephone lines; not suitable for high-speed data networking.
- Requires basic DIY or professional installation.
- IDC termination can be less forgiving than screw terminals if not done correctly.
Setup, Compatibility & Care
Setup:
- Ensure power to the relevant circuit is switched OFF at the mains.
- Remove the old faceplate (if applicable).
- Connect the existing telephone wires to the corresponding IDC terminals on the new socket. Ensure the wires are fully seated within the connectors.
- Secure the new faceplate to the wall box.
- Restore power and test the telephone connection.
Compatibility:
- Compatible with standard UK telephone wiring (BT line).
- Suitable for use with single-line telephones and basic telecommunications equipment.
- Designed for installation into standard UK single-gang electrical back boxes.
Care:
- Clean the socket with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Periodically check the connection integrity, especially if experiencing intermittent issues.