Knipex High Leverage Diagonal Side Cutter - 200mm

These pliers are designed to cut piano wire and medium-hard wires effectively due to their high leverage and induction-hardened cutting edges.

The high leverage design, achieved through a forged-on pivot, multiplies the force applied to the cutting jaws, allowing you to cut tougher materials with less effort compared to standard pliers.

While they are pliers, their primary design is for cutting. They lack the serrated jaws typically needed for effective gripping and are not optimized for bending tasks.

They are manufactured from high-quality chrome vanadium electric steel, which is known for its strength, durability, and resistance to wear.

Keep the cutting edges clean and free of debris. Periodically lubricate the pivot joint with light machine oil. Avoid cutting materials harder than specified to preserve sharpness.

Knipex offers a lifetime warranty on their pliers, covering defects in materials and workmanship under normal use. Refer to Knipex's warranty policy for full details.

These handles are designed for comfort and safety with slip guards, but they are not specifically insulated for protection against electrical shock. Always de-energize circuits before working.

Check the pivot for debris or damage. Clean and lubricate the pivot. If the issue persists, the cutting edges may be worn or damaged; contact Knipex for warranty service.

The pivot joint may need lubrication. Apply a small amount of light machine oil to the pivot and work the handles back and forth. Ensure no debris is obstructing the joint.

Ensure you have a firm grip on the handles and that the material is correctly positioned within the jaws. The slip guards on the handles are designed to improve grip; ensure your hands are properly positioned.

This can occur if the wire is near the maximum hardness or diameter the pliers can handle, or if the cutting edges are dull. Ensure you are using the correct part of the cutting edge for the wire type and position. If edges are dull, professional sharpening or replacement may be needed.