Best current price£8.51from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£8.51Visit shop Stanley Hand Tools Flat Narrow Crown Staples 5063750512976
Visit shop
B&Q£8.88Visit shop - Stanley Hand Tools Flat Narrow Crown Staples Multi Colour (10mm)
Visit shop3 offers from £8.51 - £10.00
View price history by clicking the chart icon.
These Stanley 10mm flat narrow crown staples are designed for specific Stanley cable tackers and composite staplers, offering a secure fastening solution for low-voltage wiring and other light-duty applications. While they provide reliable performance within their intended tool range, their compatibility is limited to the specified models. This guide will help you understand their features, optimal usage, and care.
| Model Part Number | 6-CT-10X |
|---|---|
| Brand | Stanley |
These staples are primarily used for securing low-voltage wiring and cables, such as speaker or alarm wires, to surfaces using compatible Stanley staplers.
No, these Stanley 10mm staples are designed specifically for the Stanley 6-CT-10X Cable Tacker, FatMax® Composite 4-in-1 Stapler, and FatMax® Lightweight Hammer Tacker. Using them with other tools is not recommended.
Each plastic box contains 1000 staples.
While the staples themselves are durable, prolonged exposure to outdoor elements may lead to corrosion. It is best to store them in their original dry packaging.
A narrow crown means the width of the staple's top bar (the part that rests on the surface) is relatively small. This design helps to avoid damaging the insulation of wires and cables when fastening.
Ensure you are using the correct tool and setting. Drive the staple flush with the surface, avoiding over-driving, which could pinch or cut the wire insulation. Always test on a scrap piece first.
Ensure you are using the correct Stanley tool model. Check if the tool's magazine is properly loaded and free of obstructions. If using a manual stapler, ensure sufficient force is applied. For powered tackers, check the power source.
Remove all staples from the magazine. Inspect the magazine and driver blade for any bent staples or debris. Clean the magazine area. Ensure staples are correctly seated before reloading.
Verify that the staples are compatible with your tool model. Attempting to drive staples into very hard or dense materials may cause bending; consider pre-drilling if necessary or using a longer staple if available for the tool.
Ensure you are using the narrow crown staples, which are designed to minimize insulation damage. Do not over-drive the staple; aim for it to be flush with the surface. Test on a scrap piece of material first.
Compatibility: These 10mm staples are exclusively designed for the Stanley 6-CT-10X Cable Tacker, FatMax® Composite 4-in-1 Stapler, and FatMax® Lightweight Hammer Tacker. Using them with other tools may lead to jamming, misfires, or damage to the tool or material.
Loading: Refer to your specific Stanley tool's manual for detailed loading instructions. Generally, staples are loaded into the magazine of the stapler. Ensure the staples are correctly oriented and seated within the magazine before use.
Care: Keep the staples in their original plastic box to protect them from moisture and debris, which could cause corrosion or jamming. Store the box in a dry place. After use, ensure any unused staples are returned to the box.
