Coil Spring - KYB - RH2641

Yes, it is highly recommended to replace coil springs in pairs (left and right) on the same axle. This ensures balanced suspension performance, maintains proper vehicle alignment, and provides consistent handling characteristics.

The KYB RH2641 is designed as a direct replacement coil spring for the front right side of specific vehicle models, intended to restore original ride height and suspension performance.

While technically possible, installing coil springs requires specialized tools and a thorough understanding of automotive suspension safety. It is strongly recommended to have this service performed by a qualified professional mechanic.

Always verify the part number (RH2641) against your vehicle's make, model, year, and specific trim level using a reliable parts catalog or by consulting with a parts specialist or mechanic.

Symptoms include a noticeable sag in one corner of the vehicle, uneven tire wear, excessive bouncing after hitting bumps, or clunking noises from the suspension.

Yes, a properly functioning coil spring contributes significantly to ride comfort by absorbing road imperfections. Replacing a worn spring with a new, correct-spec KYB spring should restore original ride comfort levels.

Ensure the new spring is fully seated in its perches on both the upper strut mount and lower control arm. Verify that the correct spring was installed on the correct side. If the issue persists, check for other worn suspension components.

Check that the spring is properly seated and that any rubber isolators or insulators are in place and in good condition. Ensure all suspension fasteners are torqued correctly. The noise could also indicate issues with shocks, struts, or bushings.

Confirm that the coil spring was installed on the correct side (front right). Ensure all related suspension components (shocks, struts, ball joints, tie rods) are in good condition and properly tightened. Suspension alignment should be checked after replacing springs.