Best current price£105.00from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£105.00Visit shop Haltech 3 Port Boost Control Solenoid
Visit shop
eBay£107.54Visit shop Haltech 3 Port Low & High Boost Control Solenoid - Control Turbo / Supercharger
Visit shop3 offers from £105.00 - £107.54
View price history by clicking the chart icon.
The Haltech 3 Port Boost Control Solenoid is for automotive enthusiasts and tuners looking to precisely manage turbocharger boost pressure. Its key benefit is enabling programmable control over engine power output through accurate boost management for both low and high boost applications. A potential caveat is that optimal performance is achieved when paired with a Haltech ECU. This solenoid features a versatile 3-port design, compatibility with internal and external wastegates, and includes necessary mounting and wiring hardware.
| Model Part Number | HT-020400 |
|---|---|
| Brand | Haltech |
Its primary function is to enable precise control over turbocharger boost pressure, allowing for programmable management of engine power output.
This solenoid is designed for use with aftermarket ECUs, ideally a Haltech ECU, for programmable boost control. It may not be compatible with all factory ECUs without significant modification or an interface.
The package includes the 3 Port Boost Control Solenoid, an anti-vibration rubber mount, three push-on hose fittings, and a Deutsch DTM-2 connector with pins.
Refer to your wastegate manufacturer's documentation and your Haltech ECU tuning guide. Generally, one port connects to the turbo/manifold pressure source, and the other two connect to the wastegate actuator.
Yes, the solenoid is designed for both low and high boost applications, offering flexibility for various tuning needs.
It uses a Deutsch DTM-2 connector, which is known for its durability and weather resistance in automotive environments.
Verify all hose connections are secure and correctly routed. Check the solenoid for blockages. Ensure the ECU tuning is appropriate for the setup and that the solenoid is correctly wired and configured in the ECU software.
Check the anti-vibration mount for proper installation. Ensure wiring is secure and not causing electrical interference.
Confirm the Deutsch DTM-2 connector is properly wired to the ECU and grounded. Double-check the solenoid's port connections and ensure the ECU is programmed to activate the boost control output.
Setup: The solenoid is designed for integration with a Haltech ECU. Connect the solenoid's three ports according to your wastegate setup (typically two ports to the wastegate actuator and one to the turbo compressor outlet or manifold). Wire the Deutsch DTM-2 connector to your ECU's boost control output and ground. Ensure all connections are secure. Tuning via the ECU software is required to program boost control targets.
Compatibility: This solenoid is compatible with both internal and external wastegate systems. Optimal performance is achieved when used with a Haltech ECU, but it can be adapted for use with other aftermarket ECUs that support external boost control solenoids.
Care: Keep the solenoid clean and free from dirt and debris. Inspect hose connections regularly to ensure they are secure and not leaking. Avoid exposing the solenoid to excessive heat or moisture. Periodic checks of the wiring and connector are recommended.
