Best current price£2.15from Amazon
Shopping.co.uk recommended and popular offers
Amazon£2.15Visit shop Camlock Layflat Hose Coupling Fitting, Male Female - Type A B C D E F DC DP Cam & Groove (Type DP - Blank Plug - Female, 0.75")
Visit shop30 offers from £2.15 - £7.98
View price history by clicking the chart icon.
This guide is for users needing quick and reliable hose connections, particularly in agricultural, industrial, or water transfer applications. The primary benefit is the secure, leak-free coupling achieved with cam and groove technology. A key consideration is ensuring thread compatibility with BSP (British Standard Pipe). These polypropylene camlock fittings facilitate swift connections on hoses and pipework, offering a dependable solution for fluid transfer.
| Brand | B2C |
|---|
BSP stands for British Standard Pipe thread. It's a common standard for threaded pipes and fittings used in plumbing and mechanical applications worldwide. These fittings are designed to connect with other components that have the same BSP thread size and type.
These polypropylene camlock fittings are generally best suited for low to medium pressure applications, typically associated with layflat hoses. For high-pressure systems, consider fittings specifically rated for those conditions.
The size (e.g., 1.25", 2", 3") refers to the nominal bore diameter of the hose or pipe it is designed to connect to. Measure the inside diameter of your hose or the outside diameter of your pipe to select the matching fitting size.
Polypropylene offers good resistance to a wide range of chemicals and water. However, it's crucial to check a chemical compatibility chart for the specific fluid you intend to transfer to ensure the material is suitable and will not degrade over time.
Yes, polypropylene is generally UV resistant to some extent, making it suitable for outdoor use. However, prolonged exposure to harsh sunlight can eventually degrade the material. Storing them out of direct sunlight when not in use can prolong their lifespan.
Type A typically has a Male Cam end and a Female BSP thread end (Cam M to BSP F). Type D typically has a Female Cam end and a Female BSP thread end (Cam F to BSP F). They are designed to connect to each other or other compatible camlock types.
Check for debris or obstructions in the cam grooves or on the sealing surfaces. Ensure the cam arms are fully open. Verify you are using the correct size and type of fitting.
Ensure the cam arms are fully closed and latched. Inspect the gasket (if present) for damage or wear and replace if necessary. Confirm that both fittings are properly seated and aligned before closing the cams.
Clean the cam mechanism thoroughly. Apply a small amount of silicone-based lubricant to the pivot points of the cam arms. Avoid using petroleum-based lubricants which can degrade polypropylene.
Ensure the cam arms are fully engaged and locked. If the cam arms appear bent or damaged, they may not be able to secure the connection properly. Inspect for damage and replace if necessary.
Setup:
Compatibility:
Care:
