Lumberjack Tools Circular Saw - 185mm - 1400W

Use a blade specifically designed for wood cutting. The number of teeth will depend on the type of wood and desired finish.

There is a depth adjustment lever or knob on the saw. Loosen it, adjust the blade height to the desired depth, and tighten the lever or knob.

This saw is designed for wood, MDF, and Perspex. Using it to cut metal could damage the saw and pose a safety risk. Use the correct tool for the material.

Loosen the bevel adjustment, set the angle to the desired degree, and tighten the adjustment. Ensure the material is securely clamped.

Keep the blade clean and free from resin buildup. Replace the blade when it becomes dull or damaged.

Please consult the product documentation or contact Lumberjack Tools for specific warranty information.

Check the power cord and outlet. Ensure the switch is in the 'on' position.

Check the blade for sharpness and ensure it's the correct type for the material. Check the cutting depth setting.

Ensure the blade is securely fastened and not damaged. Check the material being cut for any obstructions.

Check that the dust extraction port is properly connected to a vacuum system.