Best current price£12.99from Joybuy
Shopping.co.uk recommended and popular offers
Joybuy£12.99Visit shop Creality Grey Hyper Pla 1Kg High-Speed 30-600Mm/S, Dimensional Accuracy +/-0.02Mm, Compatible With Most Fdm 3D Printers, 1Kg (2.2Lbs) Spool
Visit shop4 offers from £12.99 - £18.98
View price history by clicking the chart icon.
Creality Hyper PLA is designed for 3D printing enthusiasts and professionals who need to balance high-speed output with structural precision. This filament excels in rapid prototyping by supporting print speeds up to 600mm/s while maintaining strict dimensional accuracy. One caveat is that while it is highly versatile, users should ensure their printer's hotend is calibrated within the 190°C to 230°C temperature range to avoid potential extrusion issues during high-speed operation.
| Model Part Number | 3301010340 |
|---|---|
| Brand | Creality |
Yes, it is compatible with any FDM printer that accepts 1.75mm PLA filament.
The recommended range is between 190°C and 230°C depending on your print speed.
While not strictly mandatory for every print, a heated bed is highly recommended to improve adhesion and prevent warping.
No, your printer must be specifically designed for high-speed operation to safely reach 600mm/s without quality loss.
The spool contains 1kg of filament, with a total package weight of approximately 1.29kg.
Clean your build plate with isopropyl alcohol and verify that your Z-offset is properly calibrated for a tighter 'squish' on the first layer.
The filament has absorbed moisture. Use a dedicated filament dryer or a dehydrator to remove humidity.
Ensure your hotend can handle the volumetric flow rate. Lower your speed slightly or increase the nozzle temperature by 5-10 degrees.
To achieve the best results with Creality Hyper PLA, ensure your printer's nozzle temperature is configured between 190°C and 230°C. Start at the lower end for fine details and increase if you experience underextrusion at high speeds.
Store the spool in a dry, cool environment. PLA is hygroscopic; if the filament absorbs moisture, you may notice 'popping' sounds or pitting on the surface of your prints. If this occurs, use a filament dryer at 45°C for 4-6 hours to restore performance.
