Electromagnetic Switch - Typecat - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Typecat Electromagnetic Switch in Silver is designed for professionals and DIY enthusiasts requiring reliable electrical control. Its key benefit is providing a safe and efficient way to switch power to machinery and equipment, with a notable degree of protection against dust and water ingress. A minor caveat is its specific voltage and current ratings, which must be matched to the application.
All features
| Colour | Silver |
|---|---|
| Model Part Number | KJD12 |
| Brand | Typecat |
Extended Product Information
FAQs
What is the maximum voltage and current this switch can handle?
The switch is rated for a maximum voltage of 250V and a maximum current of 16A. For inductive loads (like motors), the maximum rated current is 12A.
What does IP54 protection mean?
IP54 indicates that the switch is protected against dust ingress (meaning dust cannot enter in harmful quantities) and is protected against water splashing from any direction.
Can this switch be used outdoors?
While it has IP54 protection against water splashes, it is not fully waterproof. It is best suited for sheltered outdoor locations or indoor environments where dust and moisture might be present, but not direct heavy rain or immersion.
What is the T85 rating?
The T85 rating means the switch is designed to operate reliably in ambient temperatures up to 85°C (185°F).
How many times can this switch be operated before failing?
The switch is rated for 5E4 operating cycles, which translates to 50,000 operating cycles, indicating a good level of durability for frequent use.
Is this switch suitable for DC circuits?
This switch is designed for AC (Alternating Current) circuits with the specified voltage and frequency ratings. It is not recommended for use with DC (Direct Current) circuits.
How should I clean the switch?
Clean the switch with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents that could damage the casing or internal components.
Troubleshooting
Switch does not activate machinery.
Verify that the main power supply is on and the circuit breaker is engaged. Double-check all wiring connections to ensure they are secure and correctly installed according to the terminal markings. Confirm the load does not exceed the switch's rated current (16A/12A for inductive loads).
Switch feels hot during operation.
This could indicate an overload. Disconnect power immediately and check if the connected load exceeds the 16A (or 12A inductive) rating. Ensure the ambient temperature is within the T85 operational limit. If the issue persists with a known safe load, the switch may be faulty and require replacement.
Intermittent operation or failure to switch.
Check wiring for loose connections. Ensure the switch is not subjected to excessive vibration. If the issue persists after checking connections, the internal contacts may be worn or damaged, and the switch may need replacement.
Visible damage to the casing.
Immediately disconnect power. Do not use the switch if the casing is cracked or damaged, as this compromises its protection rating (IP54) and electrical safety. Replace the switch with a new unit.
Pros and Cons
Pros
- Durable construction with a high number of operating cycles.
- Good protection against dust and water (IP54 rating).
- Suitable for a wide range of standard voltage applications.
- Designed for reliable operation in elevated temperatures (T85).
- Clear current ratings for resistive and inductive loads.
Cons
- Specific voltage (250V) and current (16A/12A) ratings limit its use to compatible systems.
- Installation requires electrical knowledge and adherence to safety standards.
- No specific mention of integrated safety features beyond standard electrical protection.
Setup, Compatibility & Care Instructions
Setup:
Installation of this electromagnetic switch should only be performed by a qualified electrician. Ensure the power source is completely disconnected before attempting any wiring. Connect the incoming power lines to the appropriate input terminals and the outgoing load lines to the output terminals as indicated by the switch's labeling. Secure all connections firmly to prevent loose wiring.
Compatibility:
This switch is rated for 250V and a maximum of 16A (12A for inductive loads). It is compatible with standard single-phase AC power systems within these limits. Ensure the frequency (50/60Hz) matches your power supply. It is not designed for DC circuits or voltages/currents exceeding its specified ratings.
Care:
To maintain optimal performance and longevity, regularly inspect the switch for any signs of damage or wear. Keep the exterior clean using a dry or slightly damp cloth; avoid using harsh solvents. Ensure the terminal connections remain clean and tight. Due to its IP54 rating, avoid direct high-pressure washing. Periodically check for any accumulation of dust or debris around the switch and clear it gently.