Best current price£6.53from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£6.53Visit shop Bailey Electric & Electronics bv Ecobasic LED Tube 1000 lm 10 W LED Tube Light, T8, 1.97ft (600mm)
Visit shop1 offer from £6.53
View price history by clicking the chart icon.
The Bailey Ecobasic LED Tube is a high-efficiency lighting solution designed for homeowners and facility managers looking to transition from traditional 18W fluorescent tubes to modern LED technology. This 10W tube provides a crisp, neutral 4000K light output suitable for workspaces and general indoor illumination; however, users should note that it is categorized under energy efficiency class F, so check local regulatory requirements if specific energy ratings are mandated for your installation.
| Model Part Number | 80100040812 |
|---|---|
| Brand | Bailey |
Yes, this 10W LED tube is designed to be a direct replacement for standard 18W fluorescent tubes.
This tube provides a neutral white light at 4000K.
No, this tube is intended for indoor use only unless housed in a fully enclosed, weather-proof fixture.
It uses a standard G13 base, common for most T8 lighting fixtures.
Ensure the tube is wiped clean of dust periodically and installed in a fixture that provides adequate ventilation.
The Bailey Ecobasic LED has a Color Rendering Index of 80-89.
Ensure the G13 base is fully seated in the socket and that the pins are making proper contact.
Verify that the circuit breaker is active and that the power switch is in the 'on' position.
Check if the existing fixture utilizes an electronic ballast that is incompatible; standard LED retrofits may require bypassing the starter or ballast in some legacy fluorescent setups.
Installation is straightforward due to the universal G13 base and 600mm length, which are standard for T8 fluorescent fixtures. Always ensure that the power to the fixture is switched off at the circuit breaker before attempting to install or replace the tube. When handling, hold the tube by the ends to avoid applying pressure to the glass housing. To clean the surface, use a soft, dry cloth; do not use chemical solvents or water, as the tube is not sealed against moisture. Periodic inspection of the fixture sockets is recommended to ensure they are not oxidized or damaged, as this can affect the lifespan of the LED tube.
