4Trade 3/4in Copper Olives - 787104

A copper olive is used in compression fittings to create a watertight seal between a copper pipe and a fitting.

No, these olives are designed for use in compression fittings, which do not require soldering.

These olives are designed for use with 3/4in copper pipes and fittings.

Slide the olive onto the copper pipe, assemble the fitting, and tighten the compression nut. Ensure proper alignment and that the pipe is clean.

Try tightening the compression nut slightly. If the leak persists, disassemble the fitting, check the olive for damage, and reassemble it carefully.

These olives are suitable for use in most domestic plumbing applications using compression fittings. Always check the suitability for your specific application.

Store unused olives in a dry place to prevent corrosion and keep them ready for future use.

The 4Trade olives come with a 1-year guarantee.

Tighten the compression nut slightly. If the leak persists, disassemble the fitting, inspect the olive for damage, and replace if necessary. Ensure the pipe end is clean and properly prepared.

Ensure the pipe is properly aligned and the olive is seated correctly. Use the correct size wrench and apply even pressure when tightening.

Make sure the pipe end is clean and free of burrs. Apply a small amount of pipe lubricant if needed, and try to gently twist the olive while sliding it on the pipe.