Shopping.co.uk

Nanlite PavoTube II 15X Waterproof Housing - AS-WT-PTII15X

Nanlite PavoTube II 15X Waterproof Housing - AS-WT-PTII15X

The Nanlite Waterproof Housing for PavoTube II 15X LED Pixel Tubes shelters your Nanlite PavoTube ...

Best current price£55.00from Wex Photo Video

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Wex Photo Video£55.00Visit shop

NanLite AS-WT-PTII15X Waterproof Housing for PavoTube II 15X LED Pixel Tubes - Polycarbonate - Transparent

Visit shop

One Offer

1 offer from £55.00

View price history by clicking the chart icon.

Wex Photo VideoNanLite AS-WT-PTII15X Waterproof Housing for PavoTube II 15X LED Pixel Tubes - Polycarbonate - Transparent
Free delivery in 1–3 days
£55.00
Visit shop

Product Information

Full details

The Nanlite Waterproof Housing for PavoTube II 15X LED Pixel Tubes is designed for filmmakers and photographers who need reliable lighting in challenging environments. Its key benefit is providing an IP68 certified hermetic seal, protecting the PavoTube II 15X from water and dust. A potential caveat is the added bulk and weight, which might affect portability in certain scenarios.

All features

Model Part NumberAS-WT-PTII15X
BrandNanlite

Extended Product Information

FAQs

Is this housing suitable for the PavoTube II 15X?

Yes, this housing is specifically designed to be a perfect fit for the Nanlite PavoTube II 15X 2' RGBWW LED Pixel Tube.

What is the maximum depth the housing can be submerged?

The housing is IP68 certified for waterproofing up to 32.8ft (10 meters).

What material is the housing made from?

The housing is constructed from durable Polycarbonate (PC).

How much does the housing weigh?

The housing weighs approximately 650g (1.43 lbs).

Can I use this housing with other Nanlite lights?

This housing is specifically designed for the Nanlite PavoTube II 15X. It may not fit other Nanlite light models.

Does the housing affect the light output?

The Polycarbonate material is chosen for its transparency, allowing light to pass through with minimal diffusion or loss.

How do I clean the housing?

Wipe the exterior with a soft, slightly damp cloth. Avoid abrasive cleaners. Ensure it is completely dry before storing or using.

Troubleshooting

Housing does not seal properly

Ensure the PavoTube II 15X is fully seated inside the housing and that there is no debris on the sealing surfaces. Check that all locking mechanisms are fully engaged.

Water ingress detected after use

Immediately remove the light and open the housing. Dry everything thoroughly. Inspect the seals for any tears or damage. If damaged, contact Nanlite support for replacement parts. Do not use the housing if seals are compromised.

Difficulty mounting the housing

Ensure you are using the 1/4 in-20 receivers located at the ends of the housing. Verify that your mounting hardware is compatible with standard tripod threads.

Pros and Cons

Pros

  • Provides excellent protection against water and dust ingress (IP68 rated).
  • Enables creative lighting solutions in wet or submerged conditions.
  • Durable construction ensures longevity and protects the light source.
  • Offers versatile mounting options via standard 1/4 in-20 receivers.
  • Maintains good light transmission due to the clear Polycarbonate material.

Cons

  • Adds significant bulk and weight to the PavoTube II 15X.
  • May require careful sealing to ensure full waterproofing.
  • Not designed for high-impact physical abuse, despite durable material.
  • Can potentially affect heat dissipation from the light tube.

Setup, Compatibility & Care

Setup:

  1. Ensure the Nanlite PavoTube II 15X LED Pixel Tube is powered off and disconnected from any power source.
  2. Carefully slide the PavoTube II 15X into the Waterproof Housing, aligning it properly.
  3. Securely close the housing, ensuring the hermetic seal is properly engaged. Check that any locking mechanisms are firmly in place.
  4. Attach any necessary grip equipment or stands to the 1/4 in-20 receivers on either end of the housing.

Compatibility:

  • This housing is specifically designed for the Nanlite PavoTube II 15X 2' RGBWW LED Pixel Tube.

Care:

  • After use in wet conditions, carefully open the housing and dry both the inside and outside thoroughly with a soft, lint-free cloth.
  • Inspect the seals for any debris or damage before closing the housing for the next use.
  • Clean the Polycarbonate exterior with a slightly damp cloth. Avoid abrasive cleaners that could scratch the material.
  • Store the housing in a dry place when not in use.

Price History

DatePrice
Visit shop