Sandtex Smooth Matt Masonry Paint - Slate Grey

The 150ml tester pot is designed for small areas. Coverage will vary depending on the surface texture and how thickly the paint is applied. It's ideal for testing the colour, rather than painting a whole wall.

This paint is specifically designed for exterior masonry surfaces, such as brick, concrete, and render. It may not be suitable for interior walls.

Drying times can vary depending on the environmental conditions. Always refer to the product label for the recommended drying time. Typically, it should be touch-dry in a few hours.

Ensure the surface is clean, dry, and free from any loose or flaking material, dirt, or mildew before painting. A light sanding might be necessary for particularly uneven surfaces.

Yes, but ensure the existing paint is sound and well-adhered. Clean and lightly sand the existing surface before applying the Sandtex paint.

You will need a brush or roller, a paint tray, and appropriate personal protective equipment (PPE) like gloves.

Dispose of any remaining paint responsibly, following local regulations for paint disposal. Allow the paint to dry completely and dispose of it as household waste.

Ensure even application, and consider applying a second coat, allowing the first coat to dry completely before doing so.

The final colour may vary depending on the surface and lighting conditions. Test on a small area first to see how it looks.