Wavin Osma Squareline Gutter Jointing Bracket - Black

The Wavin Osma Squareline gutter is 100mm (4 inches) wide and features a square profile.

The system uses a 61mm square downpipe. A 68mm circular downpipe can be connected using an appropriate adaptor.

No, the jointing bracket fixes directly to the fascia and does not require separate brackets for the join itself. However, standard gutter brackets should be used along the length of the gutter run.

The Flexiclip mechanism involves flexing the clip component itself during installation, which creates a tight, positive seal against the gutter ends, preventing water ingress.

No, this jointing bracket is specifically designed for the Wavin Osma Squareline system and is not compatible with other brands or profiles.

The Wavin Osma Squareline system can cover a maximum roof area of 178m² with one downpipe.

The Squareline system, including this jointing bracket, is available in black, white, and brown.

Ensure the gutter ends are fully inserted into the bracket and that the Flexiclip is properly engaged. Check for any debris or damage on the gutter ends or within the bracket seals. Ensure the bracket is securely fixed to the fascia.

Verify that you are using the correct bracket for the Osma Squareline system. Ensure the gutter ends are aligned correctly and that no obstructions are present. Lightly lubricate the seals if necessary, using a silicone-based lubricant.

Check that the jointing bracket is securely fastened to the fascia. Additional gutter brackets may be required at closer intervals, especially on longer runs or in areas prone to heavy snow or wind.