Kenable Power Distribution Unit - 10 Way UK Sockets, Vertical, 3M Cable
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Kenable Power Distribution Unit (PDU) is designed for users needing to manage high-power connections in industrial or workshop environments. It offers a robust solution with 10 UK socket outlets powered by a 16A 3-pin Commando plug, capable of supporting up to 4000W. Its primary advantage is its vertical mounting design, ideal for server racks or enclosures, though it can also be mounted under a desk. A potential limitation is its specific vertical orientation, which may not suit all space constraints.
All features
| Model Part Number | 013100 |
|---|---|
| Brand | kenable |
Extended Product Information
FAQs
What is the maximum total power this PDU can handle?
The Kenable Power Distribution Unit has a maximum load capacity of 4000W, which corresponds to 16A at 250V.
What type of power plug does this PDU use?
It features a 16A 3-pin IP44 Commando plug, which is a standard for higher power industrial and commercial applications.
Can this PDU be mounted horizontally?
This PDU is specifically designed for vertical mounting in cabinets or enclosures. It is not designed for standard 19-inch horizontal rack mounting.
What is the cable length?
The unit comes with a 3-meter power cable.
Does it come with mounting hardware?
The PDU has integrated features for vertical mounting. For under-desk mounting using the rear ears, fixings are not supplied and must be sourced separately.
Is the power switch protected?
Yes, the illuminated rocker switch is covered by a protective cover to prevent accidental activation or deactivation and protect it from dust.
Can I use this PDU for domestic appliances?
While it has UK sockets, the 16A Commando plug requires a specific type of power outlet typically found in industrial or workshop settings. Ensure your power source is compatible.
Troubleshooting
Unit not powering connected devices.
Ensure the 16A Commando plug is securely connected to a live power outlet. Verify the illuminated rocker switch is in the 'ON' position. Check that the total load of connected devices does not exceed the 4000W (16A) limit.
Intermittent power to devices.
Check for loose connections at the power source or within the PDU sockets. Inspect the 3-meter cable for any damage. Reduce the number of devices connected to ensure the total load is within limits.
Overheating.
Immediately disconnect power and investigate the cause. Overheating typically indicates the total connected load exceeds the 16A rating. Remove devices until the load is within the safe operating limit.
Illuminated switch not working.
The switch illuminates to indicate power is reaching the unit. If the unit is powering devices but the light is out, the bulb may have failed. If the unit is not powering devices, troubleshoot as per the 'Unit not powering connected devices' issue.
Pros and Cons
Pros
- High power capacity (4000W) suitable for demanding equipment.
- Secure 16A Commando plug ensures reliable power delivery.
- Vertical form factor is ideal for space-saving in server racks or cabinets.
- Additional under-desk mounting capability provides installation flexibility.
- Illuminated switch with cover enhances safety and usability.
- Long 3-meter cable offers flexibility in placement.
Cons
- Primarily designed for vertical mounting, which may not be suitable for all setups.
- Commando plug may require specific power circuits not common in domestic environments.
- Fixings for under-desk mounting are not supplied.
- Length (66cm with ears) might exceed clearance in some smaller cabinets.
- Limited to 10A per socket outlet when not all sockets are utilized at full load.
- Not suitable for standard 19-inch horizontal rack mounting.
Setup, Compatibility & Care
Setup:
- Mounting: Decide on the mounting location. For vertical cabinet mounting, utilize the integrated mounting points. For under-desk mounting, use the rear-mounted ears and appropriate fixings (not supplied). Ensure the mounting surface is stable and can support the unit's weight and cable strain.
- Connection: Connect the 16A 3-pin Commando plug to a suitable, appropriately rated power source. Ensure the power source can handle the total potential load of the connected devices.
- Device Connection: Plug your equipment into the 10 UK 3-pin socket outlets.
Compatibility:
- Plug Type: Requires a 16A 3-pin IP44 Commando socket.
- Voltage: Compatible with standard UK 250V power supplies.
- Load Limit: Maximum total load of 4000W (16A).
Care:
- Cleaning: Disconnect the unit from the power source before cleaning. Wipe the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Maintenance: Regularly inspect the cable and plug for any signs of damage. Ensure sockets are free from dust and debris. Periodically check that connected equipment does not exceed the total 16A load limit.