Origin Storage Inception SSD - mSATA 3D TLC

Origin Storage Ltd manufactures a full range of Matched SSD Solutions for most major branded Serve...

Best current price£173.75from eBay

All Offers

2 offers from £173.75

View price history by clicking the chart icon.

eBayOrigin Storage SSD 1TB 3D TLC SSD mSATA 3.3V
Free delivery in 1–3 days
£173.75
Visit shop

Product Information

Full details

This 1TB mSATA SSD from Origin Storage, part of the Inception TLC830 Pro series, is designed for users looking to significantly boost the performance and extend the lifespan of their laptops and desktops. It offers high read and write speeds with 3D TLC NAND technology for enhanced reliability. A potential caveat is its mSATA form factor, which requires specific compatibility with your device's motherboard.

All features

SeriesInception TLC830 Pro
Model Part NumberNB-10003DTLC-MINI
BrandOrigin Storage

Extended Product Information

FAQs

What is an mSATA SSD?

mSATA stands for Mini-SATA. It's a smaller form factor SSD designed for devices with limited space, like ultrabooks and small form-factor PCs. It uses the SATA interface but has a different physical connector than standard 2.5-inch SATA drives.

Can I use this SSD in a standard M.2 slot?

No, mSATA and M.2 are different physical connectors and protocols. This SSD requires a dedicated mSATA slot. Adapters may exist but are not guaranteed to work and are not recommended.

What is 3D TLC NAND?

3D TLC NAND is a type of flash memory where memory cells are stacked vertically in three dimensions. This allows for higher density, improved performance, and better endurance compared to planar (2D) NAND technology.

Does this SSD support NVMe speeds?

No, this SSD uses the SATA III interface, which has a theoretical maximum speed of 600 MB/s. NVMe is a separate protocol that utilizes PCIe lanes for much higher speeds, typically over 3000 MB/s.

How does S.M.A.R.T. support help me?

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) allows the SSD to monitor its own health and report potential issues to the operating system, giving you an early warning of potential drive failure.

What is the warranty period for this SSD?

The Origin Storage Inception TLC830 Pro series SSDs come with a 3-year advanced replacement warranty.

Is technical support included?

Yes, Origin Storage provides free, in-house pre and post-sales technical support for their Inception SSDs.

Troubleshooting

SSD not detected by the system

Ensure the SSD is properly seated in the mSATA slot. Check BIOS settings to confirm the mSATA port is enabled. Try a different mSATA slot if available.

Slow performance or frequent disconnections

Verify that TRIM support is enabled in your operating system. Check for any firmware updates from Origin Storage. Ensure proper cooling for your device, as overheating can degrade performance.

Operating system installation fails

Format the SSD before installation using a Disk Utility tool. Ensure the BIOS is set to the correct boot mode (e.g., AHCI for SATA). Verify the SSD capacity is recognized correctly in BIOS.

Drive health warnings from S.M.A.R.T.

Consult Origin Storage's technical support. While S.M.A.R.T. is supported, drive health depends on usage. Consider backing up data immediately if critical warnings appear.

Pros and Cons

Pros

  • Significant performance upgrade over traditional HDDs
  • Compact mSATA form factor suitable for many devices
  • Fast read/write speeds for quicker boot times and application loading
  • Durable 3D TLC NAND technology for longevity
  • Comprehensive technical support and warranty

Cons

  • Requires a compatible mSATA slot on the motherboard
  • Not suitable for devices without an mSATA port
  • NVMe interface not supported, limiting top-tier speed potential on newer systems
  • No hardware encryption for data security

Setup, Compatibility & Care

Setup: To install the Origin Storage Inception SSD NB-10003DTLC-MINI, ensure your device has a compatible mSATA slot. Power off your computer, disconnect the power source, and locate the mSATA slot on your motherboard. Carefully insert the SSD into the slot at a slight angle and gently press it down until it lies flat. Secure it with the appropriate screw. Reconnect power and boot up your system. You may need to format the drive and install an operating system or clone your existing drive.

Compatibility: This SSD uses the mSATA interface and is compatible with laptops and motherboards featuring an mSATA slot. It supports both Windows and Linux operating systems. It does *not* support the NVMe interface.

Care: SSDs generally require minimal care. Avoid exposing the drive to extreme temperatures outside its operating range (-40 to 85 °C for storage). Ensure proper ventilation for your device to prevent overheating, which can affect performance. Regularly check drive health using S.M.A.R.T. tools if available in your system's BIOS or through third-party software. Keep firmware updated if manufacturer provides updates.

Price History

DatePrice
Visit shop