Best current price£3.20from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£3.20Visit shop Luceco Uk Ltd 3G 13A Fused Multisocket Adaptor Msf3-01
Visit shop
Hughes£5.49Visit shop Masterplug MSF3 3 Gang Mains Block Extension Cord
Visit shop2 offers from £3.20 - £5.49
View price history by clicking the chart icon.
The Masterplug 3 Gang Mains Block (MSF3) is designed for users needing to connect multiple electrical devices from a single power outlet. Its key benefit is providing a fused, safe expansion of one socket into three, ideal for home offices or entertainment setups. A potential caveat is that it does not offer surge protection, so sensitive electronics should be connected with caution.
| Model Part Number | MSF3 |
|---|---|
| Brand | Masterplug |
No, the Masterplug 3 Gang Mains Block (MSF3) does not provide surge protection. It offers basic overcurrent protection via its 13A fuse. For devices sensitive to power surges, a dedicated surge protector should be used.
To replace the fuse, carefully unplug the mains block from the wall socket. Locate the fuse holder (usually a small sliding door on the side or end of the plug). Gently push and slide the fuse holder open, remove the old fuse, and insert a new 13A fuse. Close the fuse holder securely and then plug the mains block back in.
The mains block is fitted with a 13A fuse. This means the total power draw from all connected devices should not exceed the capacity of a 13A fuse, which is approximately 3000 watts at 230V. Avoid running multiple high-power appliances simultaneously.
No, this Masterplug mains block is designed for indoor use only. Using it outdoors can be dangerous and may damage the product.
You can plug up to three devices into the Masterplug 3 Gang Mains Block, provided their combined power consumption does not exceed the 13A fuse rating.
This unit is designed to plug directly into a wall socket. It is not designed to be used with extension cords, and doing so is not recommended for safety reasons.
Check that the Masterplug MSF3 is securely plugged into the wall socket. Verify that the wall socket itself is working by testing it with another appliance. Check if the 13A fuse has blown; if so, replace it with a new 13A fuse of the correct rating.
Ensure the Masterplug MSF3 is fully inserted into the wall socket. If the wall socket is worn, consider having it inspected by a qualified electrician.
Immediately unplug the device if it feels excessively hot. This indicates an overload. Reduce the number of high-power devices connected or distribute them across different circuits. Do not use the block if overheating persists.
Setup: Simply plug the Masterplug MSF3 directly into a standard UK 13A wall socket. Ensure the wall socket is functioning correctly and is easily accessible.
Compatibility: This mains block is compatible with all standard UK mains plugs (Type G). It is designed for use with most common household appliances with a maximum combined load that does not exceed the 13A fuse rating.
Care: Keep the mains block clean and dry. Use a dry or slightly damp cloth to wipe the exterior; do not use abrasive cleaners or solvents. Ensure no liquids come into contact with the sockets or plug. Periodically check the fuse to ensure it is intact.
