Voigtlander VC Meter II - Silver

The Voigtlander VC Meter II typically uses a 1.5V alkaline battery (e.g., LR44 or SR44).

While it can physically mount on most digital cameras with a hot shoe, it's designed for manual exposure workflows and does not electronically communicate with the camera. It's best suited for cameras where you manually set aperture and shutter speed.

Set the correct ISO on the meter, then aim it at your subject. Adjust your camera's aperture and shutter speed until the LEDs indicate the correct exposure according to the meter's instructions.

The VC Meter II is an ambient light meter, designed for measuring the light in a scene.

The LED system is designed for simplicity. Typically, a series of LEDs will light up, and you aim to have a specific LED or combination of LEDs illuminate, indicating the correct exposure value.

Many older cameras lack built-in light meters. The VC Meter II provides an accurate, modern metering solution, allowing you to use these classic cameras effectively without guesswork.

Ensure the battery is correctly inserted and has sufficient charge. Check that the meter is firmly seated in the hot shoe.

Verify the ISO setting on the meter matches your film or camera's ISO. Ensure the meter is pointed directly at the subject or scene you intend to meter.

Check if there is any debris in the hot shoe or on the meter's contact points. Some cameras may have slightly different hot shoe tolerances; consider a thin shim if absolutely necessary and safe.