Laser Tools Cooling System Vacuum Purge & Refill Kit - 4287

This kit is designed to help you refill your vehicle's cooling system without trapping air, which can cause overheating and damage.

The kit includes adapters with sizes 35mm, 39mm, and 44mm in diameter. These adapters expand by approximately 4mm.

The kit is compatible with most modern cars, but it's essential to verify that the included adapter sizes fit your vehicle's radiator neck.

Connect the correct adapter, attach the vacuum pump, create a vacuum, and then open the valve to allow coolant to be drawn into the system. Always refer to the included instructions.

After use, clean all components and store them in a clean, dry location. Inspect the adapters regularly for any damage.

Replacement adapters may be available from Laser Tools or automotive tool suppliers. Check the kit packaging or contact the manufacturer for specific details.

Always wear safety glasses. Work in a well-ventilated area. Allow the engine to cool before working on the cooling system. Dispose of coolant properly.

Check the adapter sizes provided (35mm, 39mm, 44mm expanding approximately 4mm). If none of the adapters fit, the kit may not be compatible with your vehicle.

Ensure all connections are tight and that there are no leaks. Check the pump's seals and diaphragms for damage. Consult the pump's manual for specific troubleshooting steps.

Verify that the vacuum is properly established. Check the coolant valve to make sure it's open. Ensure the coolant container is positioned correctly and has sufficient coolant.