Shopping.co.uk

SIP Welding Fume Extractor Replacement Filter - Multi-Layer Mesh Spark Arrestor

SIP Welding Fume Extractor Replacement Filter - Multi-Layer Mesh Spark Arrestor

This is a replacement multi-layer mesh spark arrestor for the SIP FX200 Welding Fume Extractor. It...

Best current price£97.39from B&Q

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £97.39

View price history by clicking the chart icon.

B&QB&Q - Multi-Layer Mesh Spark Arrestor For 05813L29 X W5 X H27.8 Cm
Free delivery in 1–3 days
£97.39
Visit shop

Product Information

Full details

This guide is for users of the SIP FX200 Welding Fume Extractor who need to maintain optimal performance and extend the life of their equipment. The primary benefit is its role as a crucial pre-filter, capturing large particles like sparks and spatter to protect downstream filters. A key consideration is that it is a consumable part, requiring periodic replacement. This multi-layer mesh spark arrestor is an essential component of the FX200's 3-stage filtration system.

All features

Model Part NumberWE08-00100
BrandSIP

Extended Product Information

FAQs

How often should I replace this spark arrestor filter?

Replacement frequency depends on usage. Consult your SIP FX200 manual for specific recommendations. Generally, check it regularly and replace it when visibly dirty or clogged.

Can I wash or clean this filter?

No, this is a consumable multi-layer mesh filter designed for direct replacement. Cleaning is not recommended and may damage its structure.

What happens if I don't replace this filter?

If the spark arrestor becomes clogged or damaged, airflow will be reduced, and it will fail to protect the subsequent filters, potentially leading to premature failure of the entire filtration system.

Is this filter compatible with other SIP fume extractor models?

This specific multi-layer mesh spark arrestor is designed for the SIP FX200 Welding Fume Extractor only. Compatibility with other models is not guaranteed.

What is the main purpose of this filter?

Its main purpose is to capture larger particles like sparks and welding spatter, acting as a pre-filter to protect the finer filtration stages of the FX200 system.

Does this filter remove fine fumes?

No, this is a pre-filter. Its primary function is to catch large particles. The subsequent filters in the FX200 system are responsible for removing fine fumes and gases.

Troubleshooting

Reduced airflow from the fume extractor.

The spark arrestor may be clogged. Inspect and replace the filter if it appears dirty or blocked.

Unit is making unusual noises.

Check that the filter is correctly installed and securely seated. A loose filter can cause vibration or noise.

Visible sparks or debris escaping the unit.

The spark arrestor may be damaged or past its effective lifespan. Replace the filter immediately.

Pros and Cons

Pros

  • Protects sensitive filters from sparks and spatter.
  • Extends the operational lifespan of the welding fume extractor.
  • Maintains efficient airflow for optimal performance.
  • Ensures proper functioning of the 3-stage filtration system.
  • Designed for a precise fit with the SIP FX200 model.

Cons

  • It is a consumable part and requires regular replacement.
  • Performance can degrade if not replaced within recommended service intervals.
  • Only compatible with the SIP FX200 Welding Fume Extractor.
  • Does not filter fine particulate matter; it is a pre-filter.

Setup, Compatibility & Care

Compatibility:

  • This multi-layer mesh spark arrestor is exclusively designed for the SIP FX200 Welding Fume Extractor. Ensure your model number matches before attempting installation.

Setup/Replacement:

  1. Power Off: Ensure the SIP FX200 Welding Fume Extractor is completely powered off and unplugged from the power source.
  2. Access Filter Compartment: Open the designated filter access panel on the FX200 unit.
  3. Remove Old Filter: Carefully remove the existing spark arrestor filter. Note its orientation for correct installation of the new one.
  4. Install New Filter: Insert the new multi-layer mesh spark arrestor filter, ensuring it is seated correctly and securely.
  5. Close Panel: Securely close the filter access panel.
  6. Resume Operation: Plug in and power on the fume extractor.

Care:

  • This is a consumable filter and is not designed to be cleaned. It must be replaced periodically.
  • Refer to your SIP FX200 user manual for recommended replacement intervals based on usage and operating conditions. Typically, pre-filters require more frequent inspection and replacement than finer filters.

Price History

DatePrice
Visit shop