151 Radiator Enamel Gloss Paint - White

Coverage depends on the size of your radiator. One 180ml can will typically cover a medium-sized radiator with a single coat. Always buy extra if you are unsure.

This paint is specifically formulated for radiators and pipes. Using it on other surfaces is not recommended.

Priming is generally not required if the surface is properly prepared. However, on bare metal, a primer might improve adhesion and rust resistance.

Drying times can vary. Refer to the product label for specific drying times; usually a few hours before handling and overnight for full cure.

Clean your brushes immediately after use with a suitable paint thinner or solvent, following the manufacturer's instructions.

Ensure adequate ventilation. Wear gloves and eye protection. Avoid contact with skin and eyes. If painting indoors, open windows and doors.

Ensure you are not applying too much paint at once. Apply thin, even coats.

Make sure the surface is clean, dry, and properly prepared. Sand the surface before application.

Ensure all rust is removed before painting. Multiple coats might be needed for complete coverage in severe cases.