Pack of 10 F Connector Plugs. Easy to fit by simply screwing the connector onto the cable. Nickel-...Pack of 10 F Connector Plugs. Easy to fit by simply screwing the connector onto the cable. Nickel-plated connectors ensure a high-quality connection. Dimensions: Internal diameter of 6.7mm for use with standard coaxial or satellite cable (usually RG6). External diameter is 7.4mm. Resistance: 75ohm. Suitable for outdoor use. Excellent standard of manufacture. These connectors are used for attaching to standard satellite or coaxial cable, enabling the cable to be plugged into an aerial or a device such as a Sky or Virgin box.
This guide is for users needing to connect coaxial or satellite cables to devices like TVs or set-top boxes. The key benefit is the easy screw-on fitting and reliable, nickel-plated connection for a stable signal. A potential caveat is the specific cable diameter requirement. This pack of 10 F Connector Plugs from Loops provides a straightforward solution for terminating standard coaxial cables, featuring nickel-plated connectors for quality and suitability for outdoor use.
All features
Colour
Silver
Brand
Loops
Extended Product Information
FAQs
What type of cable do these F connectors fit?
These F connectors have an internal diameter of 6.7mm and are designed for standard RG6 coaxial or satellite cables.
Do I need any special tools to install these connectors?
No, these connectors are designed to be fitted by simply screwing them onto the cable by hand. Proper cable preparation is recommended for the best connection.
Can these connectors be used outdoors?
Yes, these connectors are suitable for outdoor use and are designed to provide a durable connection in various environmental conditions.
What does '75 Ohm' resistance mean?
75 Ohm resistance is the standard impedance for coaxial cables used in television and satellite broadcasting, ensuring optimal signal transmission with compatible equipment.
How do I ensure a good connection?
Properly prepare the cable end by stripping the outer jacket, folding back the braiding, and ensuring the central conductor is clean and straight before screwing the connector on tightly.
What is the benefit of nickel-plated connectors?
Nickel plating provides corrosion resistance and ensures a high-quality, stable electrical connection, which helps maintain signal integrity over time.
Troubleshooting
No signal or poor picture quality
Ensure the F connector is screwed on securely and making good contact with the cable's central conductor and shielding. Check that the cable is the correct type (RG6) for the connector's 6.7mm internal diameter. Verify the cable preparation was done correctly.
Connector won't screw onto the cable
Confirm you are using a cable with the correct 6.7mm internal diameter requirement for RG6 coaxial cable. The cable might be too thick or too thin. Ensure the cable end is prepared cleanly and not frayed.
Connector feels loose after installation
Double-check that the cable sheath is properly seated within the connector and that the connector has been screwed on as tightly as possible by hand. For very secure outdoor installations, consider using additional weatherproofing tape.
Pros and Cons
Pros
Simple, tool-free installation.
Durable nickel-plated construction for reliable signal.
Suitable for both indoor and outdoor applications.
Cost-effective pack of 10 connectors.
Cons
Specific internal diameter (6.7mm) may not fit all cable types.
Requires careful cable preparation for optimal fit.
Nickel plating can wear over very long periods of extreme use.
Setup, Compatibility & Care
Setup:
Prepare the coaxial cable by stripping back the outer sheath and folding the braiding and foil shielding back over the sheath.
Trim the inner dielectric material to expose the central conductor, ensuring it is clean and straight.
Screw the F connector onto the prepared cable. The connector's internal threads will grip the cable sheath, and the central pin should align with the central conductor.
Ensure the connection is snug and secure by hand-tightening.
Compatibility:
Internal Diameter: 6.7mm, suitable for standard RG6 coaxial or satellite cable.
Resistance: 75 Ohm, compatible with most television, satellite, and broadband equipment.
Care:
Keep connectors clean and dry when not in use.
For outdoor installations, ensure connections are properly sealed to prevent moisture ingress.
Periodically check connections for signs of corrosion or damage, especially in harsh environments.