Screen Printing Ink - Speedball

Allow the print to dry for at least 24 hours. Then, heat-set using an iron on a medium-high setting (no steam) for 3-5 minutes, or use a heat press at 350°F (177°C) for 30-60 seconds. Always test on a scrap piece first.

Yes, all Speedball Fabric Screen Printing Ink colors are intermixable, allowing you to create a wide spectrum of custom shades.

When stored properly in a sealed container in a cool, dry place, the ink typically has a shelf life of 1-2 years. Check for any signs of spoilage or extreme separation before use.

This ink is best suited for porous fabrics like cotton and cotton blends. While it may adhere to some synthetic blends, performance and durability can vary. Always test on a small, inconspicuous area first.

For the best opaque coverage on black or dark fabrics, it is highly recommended to use Speedball Opaque Fabric Screen Printing Inks. These are specifically formulated for superior vibrancy and coverage on dark materials.

While designed for screen printing, its water-based nature and flexibility might allow for limited use with other fabric art techniques like stenciling or block printing, provided the application method is suitable and proper heat setting is applied.

Gently stir the ink. If still too thick, add a tiny amount of Speedball Fabric Printing Medium or water (less than 5%) to achieve desired consistency. Avoid adding too much liquid, which can affect durability.

Ensure the ink was properly heat-set according to instructions. Insufficient heat can lead to poor adhesion. Also, check that the fabric is porous and suitable for screen printing.

Use Speedball's Opaque Fabric Screen Printing Inks for dark substrates. For standard colors, you may need to apply multiple thin layers, heat-setting between each, or use a white underbase.

Work in a cooler environment if possible. You can also use a screen opener or retarder spray to keep the ink open on the screen longer. Mist the screen lightly with water occasionally.