Dulux Trade Walls and Ceilings Paint - White - 5L

Best current price£68.00from Homebase
Best offers
Shopping.co.uk recommended and popular offers
Homebase£68.00Visit shop Dulux Trade Walls And Ceilings Linen White Vinyl Matt Paint 5L
Visit shop
Best current price£68.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£68.00Visit shop Dulux Trade Walls And Ceilings Linen White Vinyl Matt Paint 5L
Visit shop4 offers from £68.00 - £68.99
View price history by clicking the chart icon.
This 5L tin of Dulux Trade Walls and Ceilings Paint in White is designed for professional tradespeople and DIY enthusiasts seeking a reliable, high-quality finish for interior walls and ceilings. Its key benefit is excellent coverage, often requiring fewer coats, which saves time and effort while effectively hiding imperfections. A notable caveat is that due to being mixed to order, this product cannot be returned or refunded.
| Colour | White |
|---|---|
| Model Part Number | DXVM1295000 |
| Brand | Dulux Trade |
This paint is specifically designed for interior walls and ceilings. For wood or metal surfaces, a different type of primer and paint would be required.
If stored correctly in an airtight container in a cool, dry place, unopened paint can last for several years. Once opened, it's best to use it within 1-2 years for optimal performance.
Coverage can vary depending on the surface porosity and application method, but typically this paint provides around 10-12 square meters per litre per coat.
While suitable for general interior walls, for high-moisture areas like bathrooms or kitchens, a dedicated kitchen and bathroom paint with enhanced mould and mildew resistance might be a better choice.
Drying times can be significantly longer in cold or damp conditions. It is best to decorate in a well-ventilated room with temperatures above 10°C.
It is not recommended to mix different brands or types of paint, as this can affect the finish, durability, and performance. While mixing the same paint in different batches can be done to ensure colour consistency, always test first.
It means the paint uses water as its primary solvent. This makes it easier to clean up with water and generally leads to lower odour and VOC (Volatile Organic Compound) levels compared to oil-based paints.
Ensure the surface is properly prepared and primed if necessary. Apply a second coat, allowing adequate drying time between coats. Check if the surface is too porous; a primer might be needed.
Apply paint evenly with consistent pressure. Maintain a wet edge to avoid lap marks. Use a high-quality roller or brush suitable for emulsion paints.
This can occur due to uneven application or insufficient coats. Apply an additional thin, even coat once the previous coat is fully dry. Ensure the paint is well stirred.
Clean brushes and rollers immediately after use with warm, soapy water. Dried paint on tools will be much harder to remove.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any holes or cracks and sand smooth. For best results on new or unpainted surfaces, apply a suitable primer.
Application: Stir the paint thoroughly before use. Apply using a brush, roller, or spray gun. Work in even strokes, maintaining a wet edge to avoid lap marks. Two coats are usually recommended for best coverage and finish.
Drying Time: Allow at least 2-4 hours for drying between coats, depending on temperature and humidity. The surface can typically be recoated after this time.
Compatibility: This is a water-based emulsion paint suitable for interior walls and ceilings. It is compatible with most standard interior paints but always test on a small, inconspicuous area if unsure.
Care: Clean application tools (brushes, rollers) immediately after use with soapy water. For cleaning painted surfaces, use a damp cloth and mild detergent. Avoid harsh scrubbing, as this can damage the matt finish.