AB Tools 100mm Rust Paint Welding Spatter Removal Clean And Strip Disc - 6mm Shank

This disc is suitable for metal, wood, and fiberglass surfaces.

It is designed to remove paint, rust, weld seams, glazes, varnishes, oxidisation, corrosion, and welding spatter.

The disc features a 6mm shank, designed for use with standard drill chucks.

The disc's efficiency increases with the drill's rotational speed. Higher RPMs generally lead to faster material removal.

While effective for general stripping and cleaning, it may not be ideal for very fine detail work due to its 100mm diameter and robust cleaning action.

Store the disc in a dry environment to prevent degradation.

It is designed to minimize damage, but users should always test on an inconspicuous area first, especially on delicate wood finishes.

Increase the rotational speed of your drill. Ensure you are applying appropriate, consistent pressure. Check if the underlying material is harder than expected for this disc.

Reduce excessive pressure. Ensure you are not overheating the disc by applying constant, high pressure for extended periods. Verify drill speed is appropriate; too high can also cause premature wear.

Check that the disc is securely and centrally attached to the drill chuck. Ensure the drill's chuck is not damaged. Make sure the disc itself is not warped or damaged.

Reduce the pressure applied. Ensure the drill speed is not excessively high for the material being worked on. Try a slightly different angle of approach.