Hettich Intermat 9936 - Silver

The primary advantage is its integrated self-closing spring, providing automatic door closure and convenience, combined with precise adjustment capabilities for a perfect finish.

No, mounting plates and screws are sold separately and must be purchased in addition to the hinges.

This hinge is designed for door thicknesses ranging from 14 mm to 32 mm.

This hinge is specifically designed for overlay door applications (B 0), where the door covers the face frame of the cabinet.

Door alignment can be achieved using the integrated ±2 mm lateral and depth adjustment screws on the hinge, and by adjusting the height at the mounting plate.

The hinge requires a TH 52 drilling pattern, which measures 52 mm x 5.5 mm.

The hinges are constructed from durable, nickel-plated steel and die-cast zinc.

Verify that the self-closing spring mechanism is engaged. Check for any obstructions preventing the door from closing. Ensure the hinge is properly seated on the mounting plate.

Use the integrated lateral and depth adjustment screws on the hinge to fine-tune alignment. Adjust the height of the door by modifying the position of the mounting plate.

Ensure the hinge is clean and free of debris. A small amount of silicone-based lubricant can be applied to the hinge pivot points if necessary. Avoid oil-based lubricants which can attract dust.

Check that all screws securing the hinge to the door and the mounting plate to the cabinet are tightened securely. Ensure the hinge is correctly clipped or screwed onto the mounting plate.