Einhell Expert L Class Wet & Dry Vac - Silver

This vacuum is certified L Class, meaning it can safely collect harmful dust particles where the maximum allowable concentration (AGW) exceeds 1mg/m³. This includes dust from plaster, lime, sand, and soil. Always use the HEPA filter for dry L Class dust.

Yes, the Einhell Expert TE-VC 3080 SACL is designed for both wet and dry vacuuming. For wet use, you must remove the HEPA filter and install the included foam filter.

The socket allows you to plug in a power tool (up to 1,500W). When you turn the power tool on, the vacuum automatically starts. When you turn the power tool off, the vacuum runs for a few extra seconds to clear the hose, then shuts off. This synchronizes dust extraction with tool usage.

After heavy dust exposure, use the push-button filter cleaning system to restore suction. For regular maintenance, inspect the HEPA filter periodically. If performance is still degraded after cleaning, consider replacing the HEPA filter.

The container has a capacity of 30 litres.

After wet vacuuming, simply open the water drain plug located on the stainless steel container for easy emptying of the liquid.

The vacuum typically includes a HEPA pleated filter, a foam filter, a tear-resistant non-woven bag, a stainless steel telescopic tube with an air regulator, and a combination nozzle. Please refer to the product manual for the exact list.

Press the filter cleaning button to dislodge dust from the HEPA filter. If vacuuming liquids, check and clean the foam filter. Ensure the dust bag (for dry use) is not full or is properly installed. Check the hose and attachments for blockages.

Verify the power cord is securely plugged into a working electrical outlet. Check the power switch on the vacuum. Ensure the automatic power socket is not overloaded if a tool is connected.

Ensure the power tool is properly plugged into the vacuum's socket and the vacuum itself is powered on. Check that the power tool's draw does not exceed the 1,500W limit.

Ensure the container lid is securely fastened. Check that the water drain plug is tightly closed. If wet vacuuming, ensure the foam filter is correctly installed and the HEPA filter is removed.