Hollyland Pyro H Wireless Video Transmission System

The Hollyland Pyro H offers an upgraded transmission range, providing reliable performance over significant distances. Specific range figures can vary based on environmental conditions, but it's designed for professional on-set use.

Yes, the Hollyland Pyro H supports simultaneous connection to up to four receivers, allowing multiple crew members to monitor the video feed at the same time.

No, the Hollyland Pyro H is an HDMI-only wireless video transmission system. It features HDMI input on the transmitter and HDMI output on the receiver.

The system supports wireless video transmission up to 4K resolution at 30 frames per second (4K/30fps).

The Pyro H is typically powered using industry-standard NP-F style batteries or via a DC power input. Ensure you have compatible batteries or a power adapter for continuous operation.

The Pyro H is designed for low latency, making it suitable for real-time monitoring. While specific figures can vary, it represents a significant advancement in reducing delay for professional workflows.

Utilizing both 2.4 GHz and 5 GHz bands allows the system to automatically select the clearest channel, reducing interference and ensuring a more stable and reliable wireless video connection, even in busy RF environments.

Verify that both transmitter and receiver are powered on and paired. Check HDMI cable connections at both ends. Ensure the video source is outputting a compatible signal (4K/30fps or lower). Try switching to a different frequency band if manual selection is available.

Ensure a clear line of sight between the transmitter and receiver. Minimize potential sources of wireless interference (e.g., Wi-Fi routers, microwaves). Move closer to the receiver or reposition the transmitter. Try switching to the alternative frequency band (2.4 GHz or 5 GHz).

Ensure you are using the lowest possible resolution and frame rate supported by your workflow. Reduce the distance between transmitter and receiver. Check for any firmware updates for the system, as these often include latency improvements.

Perform a manual re-pairing procedure as outlined in the system's manual. Power cycle both devices by turning them off and on again. Ensure no other wireless devices are causing significant interference.