Best current price£93.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£93.90Visit shop VEVOR Suction Hose Kit for Water Pump, with 2 in x 50 ft Blue Backwash Hose, 20 ft Green Suction Hose, and Steel Round Hole Strainer, Camlocks, Clamps, Cam & Groove Adapter, for Multiple Purposes
Visit shop1 offer from £93.90
View price history by clicking the chart icon.
The VEVOR Suction Hose Kit is an essential tool for professionals and homeowners managing water pump applications who need a reliable, all-in-one plumbing solution. This kit excels by providing both a heavy-duty suction hose and a long-reach backwash hose, ensuring you have the right equipment for moving large volumes of water efficiently. While the kit is highly versatile, users should note that it is designed for water pumping tasks and may not be suitable for high-viscosity liquids or harsh chemicals.
| Model Part Number | TZ4050X50FT-1 |
|---|---|
| Brand | VEVOR |
The stainless steel strainer features holes with a diameter of 0.40 inches.
No, this kit is designed for general water pump applications and is not rated for potable water use.
The system is rated for a maximum operating pressure of 90 PSI.
The kit is rated to operate down to 23°F; however, avoid letting water freeze inside the hoses, as the expansion of ice can damage the structure.
The kit includes cam and groove adapters which are designed for standard 2-inch camlock connections commonly found on centrifugal pumps.
Coil the hoses neatly and store them in a cool, dry place away from direct sunlight to maintain material integrity.
Check all camlock connections for an airtight seal and ensure the intake hose and strainer are fully submerged.
Verify the rubber gaskets inside the camlock fittings are seated correctly and are not cracked or flattened.
Inspect the stainless steel strainer for debris blockage and check the suction hose for any sharp bends or kinks.
To set up, attach the suction hose to the intake port of your water pump using the provided aluminum camlock fitting. Ensure the stainless steel strainer is secured at the intake end. Connect the blue backwash hose to the discharge port using the appropriate cam and groove adapter. Tighten all clamps to ensure no leaks occur during operation. Compatibility is centered on standard 2-inch pump fittings. For care, rinse both hoses with clean water after each use to prevent sediment buildup, especially when moving muddy water. Store the hoses in a shaded, dry area to protect the material from prolonged UV exposure, and check the aluminum connectors periodically for signs of thread wear.
