Trend Two Flute Straight Router Cutter - 12mm x 1/2in Shank
Best current price£28.00from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£28.00Visit shop Trend C172MX1/2TC Two Flute Straight Cutter 12mm Dia. x 63mm Cut
Visit shopeBay£28.00Visit shop All Offers
4 offers from £28.00 - £38.14
View price history by clicking the chart icon.
eBayTrend C172MX1/2TC Two Flute Straight Cutter 12mm Dia. x 63mm Cut
£2.95 delivery
£28.00
Visit shop
C172MX1/2TC - Two Flute Straight Cutter 12mm diameter of TrendFree delivery in 1–3 days£35.95Visit shop →
Trend C172MX1/2TC Two Flute Straight Cutter 12mm Dia. x 63mm CutFree delivery in 1–3 days£35.95Visit shop →
Product Information
Full details
This Trend router cutter is designed for woodworking professionals and serious DIYers seeking a precise finish when trimming laminates and veneers. Its key benefit is the bottom cut feature combined with a PTFE coating for smooth operation and extended tool life, though its specialized nature means it's best suited for edge trimming tasks rather than general-purpose routing.
All features
| Model Part Number | C172MX1/2TC |
|---|---|
| Brand | Trend |
Extended Product Information
FAQs
What is the main advantage of the bottom bearing guide?
The bottom bearing guide allows the router cutter to follow an existing edge or template accurately, which is crucial for achieving a flush trim on laminates and veneers without needing a separate bearing on the cutter itself.
What does the PTFE coating do?
The PTFE (Polytetrafluoroethylene) coating is a non-stick surface that reduces heat and resin buildup on the cutter. This improves performance, extends the cutter's life, and results in cleaner cuts.
Can this cutter be used for general grooving tasks?
Yes, while ideal for edge trimming, the two-flute design and sharpness also make it suitable for various grooving, rebating, and shallow mortising tasks in compatible materials.
What materials can I use this cutter on?
This cutter is designed for use on softwoods, hardwoods, MDF, plywood, and chipboard.
How do I maintain the sharpness of the cutter?
The microgranular tungsten carbide tip is extremely hard and maintains its edge well. Regular cleaning after use to remove resin and debris will help preserve its sharpness and performance. Replacement is necessary if the cutting edges become dulled or chipped.
What is the working depth of this cutter?
The working depth of this Trend router cutter is 63 mm (approximately 2.5 inches).
Troubleshooting
Cutter leaves a rough edge
Ensure the cutter is sharp. Check for any resin buildup on the cutting edges and clean thoroughly. Verify the correct feed direction and speed for the material being cut.
Excessive heat generated during use
Clean the cutter to remove any resin or wood dust that may be causing friction. Ensure the PTFE coating is intact. Reduce the feed rate slightly or increase spindle speed if appropriate for the material.
Cutter does not fit the router collet
Confirm that your router is equipped with a 1/2 inch collet. If not, you may need a different shank size cutter or a collet adapter.
Resin buildup on the cutter
Clean the cutter immediately after use with a suitable solvent. The PTFE coating helps prevent buildup, but regular cleaning is essential for optimal performance.
Pros and Cons
Pros
- Achieves a professional finish on laminate and veneer edges.
- PTFE coating reduces friction and extends the cutter's lifespan.
- Microgranular Tungsten Carbide Tip ensures superior sharpness and durability.
- Bottom cut feature prevents underside tear-out.
- Suitable for a variety of routing tasks beyond edge trimming.
Cons
- Primarily designed for edge following, limiting its versatility for freehand routing.
- Requires a router with a 1/2 inch shank collet.
- The 12mm diameter may be too large for very fine detail work.
- Sharp edges require careful handling and storage.
Setup, Compatibility & Care
Setup:
- Ensure your router is unplugged before inserting or removing the cutter.
- Insert the cutter shank fully into the router collet.
- Tighten the collet securely using the appropriate wrench.
- Set the desired cutting depth.
Compatibility:
- Shank Diameter: Requires a router with a 1/2 inch collet.
- Materials: Suitable for use on softwoods, hardwoods, MDF, plywood, and chipboard.
- Router Type: Compatible with all makes of router that accept a 1/2 inch shank.
Care:
- Cleaning: After each use, clean the cutter with a soft brush or a cloth lightly dampened with a solvent to remove wood dust, resin, and debris. The PTFE coating helps minimize buildup, but regular cleaning is crucial.
- Storage: Store the cutter in its original packaging or a protective case to prevent damage to the cutting edges. Keep in a dry environment.
- Inspection: Periodically inspect the cutter for any signs of wear, chipping, or dulling. Replace the cutter if the cutting edges are significantly compromised to maintain performance and safety.