Shopping.co.uk

Araldite 90 Sec Instant Adhesive - ARA400012

Araldite 90 Sec Instant Adhesive - ARA400012

Repairing things around the house can be stressful at times. Relax! With Araldite® you can confide...

Best current price£8.89from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

16 offers from £8.89 - £20.78

View price history by clicking the chart icon.

Power Tools DirectAraldite® Arl400012 Instant Epoxy Syringe 24Ml
£5.95 delivery
£8.89
Visit shop
Blueperry agriculture (UK)Araldite® Araldite Instant Epoxy Syringe 24Ml Arl400012
Free delivery in 1–3 days
£9.19
Visit shop
eBayAraldite Instant Epoxy Glue 24ml Syringe — Fast, Strong Multi-Purpose Adhesive
£3.99 delivery
£10.49
Visit shop
Rapid Online - Rapid Electronics Ltd.Araldite ARA-400012 Instant 24ml
Free delivery in 1–3 days
£11.59
Visit shop
Tooled UpAraldite Instant Two Component Epoxy Adhesive Syringe
£5.95 delivery
£11.95
Visit shop

Product Information

Full details

This guide is for anyone looking for a strong, fast-setting adhesive for various household repairs and DIY projects. Araldite® INSTANT 90 SECONDS offers maximum durability and bonding strength across a wide range of materials. Keep in mind that it is not suitable for use on polyethylene, polypropylene, Teflon, and polystyrene.

All features

Model Part NumberARA400012
BrandAraldite

Extended Product Information

FAQs

How long does it take for Araldite® INSTANT 90 SECONDS to fully cure?

While the adhesive sets in 90 seconds, it typically achieves full strength within a few hours. Allow ample time for a complete cure before applying stress to the bond.

Can Araldite® INSTANT 90 SECONDS be used on outdoor projects?

Yes, it is water-resistant and can withstand a range of temperatures (-30°C to 80°C), making it suitable for some outdoor applications. However, long-term exposure to direct sunlight may affect the bond's longevity.

Is Araldite® INSTANT 90 SECONDS safe to use?

Yes, when used according to the instructions. Avoid contact with skin and eyes. Work in a well-ventilated area. Keep out of reach of children.

Can I paint or sand over Araldite® INSTANT 90 SECONDS?

Yes, once fully cured, you can paint or sand over the adhesive.

How do I remove uncured Araldite® INSTANT 90 SECONDS?

Use a solvent like acetone or rubbing alcohol. Always test in an inconspicuous area first.

What is the shelf life of Araldite® INSTANT 90 SECONDS?

The shelf life is typically 12-24 months if stored correctly in a cool, dry place.

Is the packaging recyclable?

Yes, Araldite® INSTANT 90 SECONDS comes in eco-friendly packaging designed for easy recycling.

Troubleshooting

Bonding is weak or fails.

Ensure surfaces are clean, dry, and roughened if they are smooth. Use the correct amount of adhesive and hold the pieces together for the full 90 seconds.

Adhesive doesn't set.

Check the expiration date. Ensure you have dispensed equal parts from both tubes. Make sure the ambient temperature is within the recommended range.

Syringe is clogged.

Clean the nozzle with a pin or needle before the adhesive cures. If the adhesive has already cured, discard the syringe.

Adhesive is difficult to dispense.

Ensure the plunger is moving smoothly. If it's difficult, try gently warming the syringe (not above room temperature) to soften the adhesive.

Pros and Cons

Pros

  • Fast setting time (90 seconds)
  • Bonds a wide variety of materials
  • Water and temperature resistant
  • Clear drying for a clean finish
  • Easy-to-use syringe applicator
  • Environmentally friendly formulation and packaging

Cons

  • Not suitable for use on polyethylene, polypropylene, Teflon, and polystyrene
  • Bonding strength may vary depending on the materials and application
  • Working time is limited due to fast setting
  • Requires careful application to ensure proper bonding

Setup, Compatibility & Care

  1. Preparation: Ensure surfaces are clean, dry, and free from grease or dust. Lightly roughening smooth surfaces can improve adhesion.
  2. Application: Use the syringe applicator to dispense equal parts of the adhesive onto one of the surfaces to be bonded.
  3. Assembly: Join the two parts immediately and hold them together firmly for 90 seconds.
  4. Curing: Allow the bond to fully cure for the time specified on the packaging before stressing the joint. Full strength is usually achieved within a few hours.
  5. Compatibility: Araldite® INSTANT 90 SECONDS is compatible with a wide range of materials (metal, wood, ceramics, glass, dry concrete, cardboard, leather, and most plastics), except for polyethylene, polypropylene, Teflon, and polystyrene.
  6. Care: Store in a cool, dry place. Avoid extreme temperatures. Wipe the nozzle clean after use and replace the cap. Dispose of the empty syringe responsibly, following local environmental guidelines.

Price History

DatePrice
Visit shop