Best current price£229.00from eBay
Shopping.co.uk recommended and popular offers
eBay£229.00Visit shop Alpine PWE-V80 Compact Underseat Sub Powered Active Subwoofer with Wired Remote
Visit shopeBay£249.99Visit shop Alpine PWE-V80 Compact Underseat Sub Powered Active Subwoofer with Wired Remote
Visit shop3 offers from £229.00 - £249.99
View price history by clicking the chart icon.
The Alpine PWE-V80 is an ideal solution for car audio enthusiasts who want to enhance their vehicle's low-end frequency response without sacrificing valuable trunk or cargo space. Designed for those seeking a streamlined, all-in-one upgrade, this active subwoofer features a built-in 160W amplifier in a compact enclosure that fits easily under most vehicle seats. While it provides excellent punch and clarity for daily listening, users should be aware that its 8-inch driver size is intended for high-quality cabin reinforcement rather than competing with large, trunk-filling competition subwoofer setups.
| Model Part Number | PWE-V80 |
|---|---|
| Brand | Alpine |
The unit typically includes the wired remote control and harness, but a standard amplifier installation kit (power, ground, and signal cables) must be purchased separately.
Yes, but ensure you measure the clearance under the seat to confirm the 80mm height will not interfere with the seat's tracks or electrical motors when adjusted.
The PWE-V80 provides a peak power output of 160W.
Yes, if your head unit has RCA outputs, you can connect it directly. If it lacks RCA outputs, you may require a speaker-to-line level converter.
The low-pass filter limits the high-frequency sounds from reaching the subwoofer, ensuring it only plays the deep bass notes it was designed for.
Verify that the amplifier is receiving power, check the fuse on the power wire, and ensure the remote turn-on wire is receiving a 12V signal from the head unit.
Lower the gain level on the remote controller and check that the low-pass filter is not set to an inappropriately high frequency.
Inspect the ground connection for a poor contact and ensure your RCA signal cables are routed away from the vehicle's power wires.
Installation of the PWE-V80 requires a standard automotive amplifier wiring kit, including a high-current power cable, ground wire, and a remote turn-on lead. Because the unit is active, you must ensure the ground connection is made to a clean, unpainted metal surface on the vehicle chassis to prevent engine noise or ground loops.
To care for your unit, keep the air vents around the heatsink area clear to ensure proper thermal management. Avoid placing heavy luggage directly on top of the subwoofer enclosure, as the physical pressure could impede driver movement. Periodically check the mounting hardware to ensure the unit remains secure under the seat, as vibrations can loosen screws over time.
