AVDEL Rivets - Silver - PRL1

These AVDEL Avex rivets (PRL1) are made of aluminum.

The dimensions are 3.2 mm in diameter and 10 mm in length, which is equivalent to 1/8" x 3/8". The flange diameter is 6.2 mm.

Each pack contains 10,000 rivets.

You will need a rivet gun suitable for 3.2mm (1/8 inch) diameter rivets. Pneumatic or heavy-duty manual rivet guns are recommended.

While aluminum rivets offer good strength for their weight, they are generally best suited for non-structural or medium-duty applications where corrosion resistance and weight are key factors. For high-stress structural joints, steel rivets might be more appropriate.

Avex rivets, like the PRL1, feature a mandrel that breaks flush with the rivet head, creating a cleaner finish. The mandrel also often has a 'lock' groove to prevent it from backing out, enhancing joint integrity.

A pack of 10,000 PRL1 rivets weighs approximately 9.55 kg.

Ensure the rivet gun is set to the correct pressure and that the tool is in good working condition. Check if the rivet gun's jaws are worn. The rivet itself might be faulty, though this is rare with reputable brands.

Verify that the drilled hole size is appropriate for the rivet diameter. If the hole is too large, the rivet will not form a tight seal. Ensure the rivet gun applied sufficient force to properly set the rivet.

Check for debris in the rivet gun mechanism. Ensure you are using the correct size rivets for your tool. Clean and lubricate the rivet gun as per its manufacturer's instructions.

This can indicate insufficient material thickness for the rivet's designed grip range or incorrect hole preparation. Ensure the materials are properly clamped together before setting the rivet.